Library Index
LOGIN required for detailed information (PDF-documents)
1565 documents found.
3D MODEL OF A PNEUMATIC DISTRIBUTOR
A 2ND – ORDER ROBUST ADAPTIVE DIFFERENTIATOR – CONTROLLER DESIGN FOR AN ELECTROPNEUMATIC SYSTEM
A 4 d.o.f. Upper-Limb Orthosis driven by Pneumatic Muscles
A 7-Axis Hybrid Hydraulic-Electric Manipulator for an Underwater Robotic Vehicle
About Calibration of Light Extinction Automatic Particle Counters
About the Prediction of Pressure Variation in the Inter-Teeth Volumes of External Gear Pumps
A CASCADE STRATEGY USING NONLINEAR CONTROL TECHNIQUES APPLIED TO A HYDRAULIC ACTUATOR
A Cavitation Avoidance Strategy in Hydraulic Switching Control Based on a Nonlinear Oscillator
Acceleration Characteristics of Servo-Controlled Pneumatic Cylinder
Accounting for Elastic Energy Storage in McKibben Artificial Muscle Actuators
ACCURATE TRAJECTORY TRACKING CONTROL OF WATER HYDRAULIC CYLINDER WITH NON-IDEAL ON/OFF VALVES
A Closed-Form Full-State Feedback Controller for Stabilization of 3D Magnetohydrodynamic Channel Flow
A Combined Scheme for Identification and Robust Torque Control of Hydraulic Actuators
A Compact Hydraulic Switching Converter for Robotic Applications
A Comparison of a PID Controller to a Neural Net Controller in a Hydraulic System with Nonlinear Friction
A Computational Tool for Failure Modes and Effects Analysis of Hydraulic Systems
A Computer Aided Conceptual Design Method for Hydraulic Components
A Conservative High-Resolution Scheme for the Study of Gases and Liquids Homentropic Flows
A CONTRIBUTION TO THE DESIGN OF HYDRAULIC LUBE PUMPS
Acoustic Comfort in Heavy Duty Machines Operator's Cab
Active Health Monitoring of Hydraulic Hoses
Active Logics as Components in Safety-related Circuits
ACTIVE LUBRICATION FOR REDUCING WEAR AND VIBRATION – A COMBINATION OF FLUID POWER CONTROL AND TRIBOLOGY
Active Regeneration Load Sensing: A Simulated Comparison with Traditional Load Sensing System in Excavators Working Cycle
Active Spindle Bearing Device for Chatter Control within Milling Machines
Active Structural Control of Hydraulically Supported Machinery
Active systems for noise reduction and efficiency improvement of axial piston pumps
Active Vibration Damping for Off-Road Vehicles using Valveless Linear Actuators
Actuation Force Control of Ca.U.M.Ha. Robotic Hand through PWM Modulated Pneumatic Digital Valves
Adaptive active attenuation of narrow-band fluid borne noise in a simple hydraulic system
Adaptive Continuously Variable Compression Braking Control for Heavy-Duty Vehicles
Adaptive Control for Improved Efficiency of Hydraulic Systems for High Speed Tilting Trains
Adaptive control of an electrohydraulic servo system utilizing online estimate of its natural frequency
Adaptive Control of Mechanical Gas Face Seals With Rotor Runout and Static Stator Misalignment
Adaptive Control of Water Hydraulic Servo Motor System –Rotational Angle and Speed Control–
Adaptive Control With Asymptotic Tracking Performance and Its Application to an Electro-Hydraulic Servo System
Adaptive Output Force Tracking Control of Hydraulic Cylinders With Applications to Robot Manipulators
Adaptive Repetitive Control Design with Application to an Electrohydraulic Servo
Adaptive Robust Control of Variable Displacement Pumps
A Develop of Hydraulic Controlling Device of Working Portion in Laser Leveling Machine
A DRIVING DYNAMICS MODEL FOR OFF-ROAD VEHICLES WITH HYDROSTATIC DRIVETRAIN
Advanced Modeling of Hydro-Mechanical Powersplit Transmissions
Advanced Sealing Systems for Modern Commercial Aircraft Hydraulic Systems
ADVANTAGES IN USING LS AND LUDV SYSTEMS TO CONTROL THE CRAWLER DOZER BLADE
Advantages of Parallel Hydraulic Hybrid Systems
A Dynamic Model of an Electropneumatic Valve Actuator for Internal Combustion Engines
A dynamic study of an air cylinder for load positioning control
A FINITE VOLUME CENTRAL DIFFERENCING SCHEME FOR SIMULATION OF THE SHUT DOWN PROCEDURE OF A HYDRAULIC SYSTEM
A Fourier-Galerkin-Newten method for nonlinear transmission line problems
A FULL FOUR-QUADRANT HYDRAULIC STEERING ACTUATOR APPLIED TO A FULLY AUTOMATIC PASSENGER VEHICLE PARKING SYSTEM
A fully-coupled thermo-elastic model for the rotating kit of axial piston machines
A FUZZY NEURAL NETWORK APPROACH TO MODEL HYDRAULIC COMPONENT FROM INPUT/OUTPUT DATA
A Hardware-in-the-Loop Spacecraft Docking Simulation System and Its Stability Analysis
A High-Order Large Eddy Simulation Method for Fluid-Power Components
A High Output-Power Piezoelectric Micropump Using Inertia of Pipe
A High Performance Planar ECF Pump for Liquid Cooling of High Power Electronic Chips
A High Performance Pneumatic Force Actuator System: Part II—Nonlinear Controller Design
A High Performance Pneumatic Force Actuator System: Part I—Nonlinear Mathematical Model
A Hydraulic Control Valve for PWM Actuation at 400 Hz
A Hydraulic Energy Efficient Fast Positioning Actuator Exploiting a Hydraulic Spring Concept
A Hydraulic Proportional Valve Identification Using Computational Fluid Dynamics and ARX Model
Air centrifugal compressors and antisurge control
Aircraft Hydraulic Fluid Diagnostics (in Czech)
Air Release Properties of Hydraulic Fluids, Dynamic Air Release Behaviour
A Kind of Adaptive Fuzzy-based PI AQM Algorithm
A Linearized Electrohydraulic Servovalve Model for Valve Dynamics Sensitivity Analysis and Control System Design
Alternating Pump Control for a Load-Sensing System
Alternative Two Valves Control Concept For Hydraulic Drive (in Czech)
A Mathematical Model of Movable Component in Single Screw Compressor
A METHOD FOR NOISE REDUCTION IN HYDRAULIC LINES
A Method to the Forward Solution of the General 6-DOF Parallel Platform Based on Generalized Force Principle
A Modified Orifice Flow Formula for Numerical Simulation of Fluid Power Systems
A Modular Design Scheme for Servo-Drives Control, with Application to Pneumatic System
A Multiplicative-recursive Filter and Linearization Scheme
A multi-sensor for monitoring the oil condition of mobile working machines in operation
A MULTIVARIABLE PASSIVITY BASED CONTROL FOR AN ELECTROPNEUMATIC ACTUATOR
AN ACCURATE TRACKING CONTROL OF AN ELECTROPNEUMATIC ACTUATOR
An Active Suspension with Reduced Complexity
An Active Vibration Isolation Method Based on CMAC Network
An adaptive learning algorithm for controlling a two-degree-of-freedom serial ball-and-socket actuator
AN ADVANCED GAP FLOW MODEL CONSIDERING PISTON MICRO MOTION AND ELASTOHYDRODYNAMIC EFFECT
An Agent-based framework for the Virtual Prototyping of Fluid Power Systems
Analysis and Control of Multi-Mode Axial Flow Compression System Models
Analysis and optimisation of the pressure reversing process of external gear pumps
Analysis of a Hydraulic Port, Plug, and Flow Through Fitting Subjected to Medium Pressure Shock Pulses
Analysis of a Hydraulic Valve by Means of a Transient Multidimensional CFD Approach
Analysis of a Pressure-Compensated Flow Control Valve
Analysis of a Tractor Rear Hitch Control System
Analysis of Capability for Manufacturing Pneumatic Cylinder Made from Polymers
Analysis of Electromagnetic Nonlinearities in Stage Control of a Stepper Motor and Spool Valve
Analysis of Flow Force in Valve with Notches on Spool
Analysis of Multiphase MultiComponents Internal Flow Fields
Analysis of Robust Electrohydraulic Force Control
Analysis of spool rotation and hydraulic lock in directional control valves
Analysis of the Dynamics of a Proportional Valve Operated by an Electronic Controller
Analysis of the Suction Performance of Axial Piston Pumps by Means of Computational Fluid Dynamics (CFD)
Analysis on Dynamic Characteristic of a High-pressure Water Generator
Analysis on Dynamic Characteristic of a High-pressure Water Generator
Analysis, simulation and experiments on a proportional flow control valve
Analytical Coupled Modeling and Model Validation of Hydraulic On/Off Valves
Analytical Solution of Filling and Exhausting Process in a Pneumatic System
Analytic Formulas for Hydrogenerator Efficiency (in Czech)
AN ANALYSIS OF A HYDRAULIC CYLINDER SEALING BY THE USE OF FINITE ELEMENT METHOD
AN ANALYTICAL AND EXPERIMENTAL STUDY OF CHAOTIC OSCILLATION IN A PNEUMATIC CYLINDER
AN APPLICATION OF DELEGATED COMPUTATION: THE CORPORATE MULTI AGENTS INFORMATION RETRIEVAL SYSTEM OF CHINA HYDRAULICS PNEUMATICS AND SEALS WEB SITE (CHINAHPS).
An Automatic Shut-off Valve for Hydraulic Accumulators
An electrohydraulic vibration exciter using a two-dimensional valve
An electropneumatic control and actuation system for the vanes of the variable geometry turbine of a turbocharged diesel engine
AN EMPIRICAL DISCHARGE COEFFICIENT MODEL FOR ORIFICE FLOW
AN ENERGETIC COMPARISON BETWEEN VALVELESS AND VALVE CONTROLLED ACTIVE VIBRATION DAMPING FOR OFF-ROAD VEHICLES
An Energetic Control Methodology for Exploiting the Passive Dynamics of Pneumatically Actuated Hopping
A Neuro-Fuzzy Control of an Electro-Hydraulic Fin Position Servo System
A new acceleration feedback design method for electrohydraulic motion control systems
A new approach for modelling and identification of the pneumatic artificial muscle manipulator based on recurrent neural networks
A New Electrostatic Oil Filter Utilizing AC and DC Electric Fields
A NEW EXPERIMENTAL ALGORITHM FOR THE EVALUATION OF THE TRUE SONIC CONDUCTANCE OF PNEUMATIC COMPONENTS USING THE CHARACTERISTIC UNLOADING TIME
A NEW FLUID - STRUCTURE INTERACTION MODEL FOR THE SLIPPER – SWASH PLATE INTERFACE
A New Generation, High Performance, Water Soluble, Polyalkylene Glycols and their Use in Hydraulic Equipment for Environmentally Sensitive Areas
A New Generation of Pneumatic Flexible Actuators Based on Innovative Textile Products
A New Mechanism of Coolant Spray for Improving Strip Shape in Hot Rolling Mills
A new method for power steering hose assembly design and acoustic optimisation by means of time domain hydraulic line simulation models
A NEW METHOD FOR TESTING THE FOAMING REACTION OF LUBRICANTS AND HYDRAULIC OILS
A new pneumatic vanes motor
A New Simulation Platform for Mechanical and Hydraulic Hybrid System --- Especially for Hydraulic Manipulators
A New Type of Continuously Variable Displacement Mechanism Used for Camshaft Connecting-rod Low Speed High Torque Hydraulic Motors
A New Type of Digital Electrohydraulic Speed Governor for Hydraulic Turbines
A New Versatile Tube Bending Machine with Hydraulic Parallel Kinematics
A New Yaw Dynamic Model for Improved High Speed Control of a Farm Tractor
An Experimental Investigation of Energy Saving Hydraulic Control System Using Switching Type Closed Loop CPS
AN EXPERIMENTAL INVESTIGATION OF THE FLOW INSIDE A HYDRAULIC VALVE BY MEANS OF LASER MEASUREMENT TECHNOLOGIES
An Experimental Investigation on the Contamination Sensitivity of an Automotive Fuel Pump
An experimental, numerical and theoretical study on valve chatter
An Experimental Result on the Measurement of Concentrated Flow Resistances
AN IMPROVED DYNAMIC MODEL OF PNEUMATIC ACTUATORS
An Improved Mathematical Model For Torque Losses in a Low Speed Hydraulic Motor
An innovative pneumatic mini-valve actuated by SMA Ni-Ti wires: design and analysis
An Integrated Approach to the Design and Maintenance of Pneumatic Power Systems
An Integrated Fluid Concept - Delivering a Machine that Requires No Oil Change
AN INVESTIGATION INTO EFFECT OF GROOVE LENGTH AND BUFFER VOLUME ON PRESSURE AND FLOW RIPPLES OF AN AXIAL PISTON PUMP
AN INVESTIGATION INTO MICRO- AND MACROGEOMETRIC DESIGN OF PISTON/CYLINDER ASSEMBLY OF SWASH PLATE MACHINES
An Investigation Into the Characteristics of a Two Dimensional "2D" Flow Control Valve
An Investigation of a Roll Control Suspension Hydraulic Actuation System
An Investigation of Hydraulic Fluid Properties and Low-speed Motor Efficiency
A Nonlinear Control Concept for Hydraulic Servo-Drives Based on a Singular Perturbation Analysis
An open-source Modelica library of fluid power models
An Optimum design method of new types of multiple volume resonators for hydraulic pulsation attenuation in real hydraulic systems
A Novel Antioxidants-System for Ester Based Lubricants
A Novel, Compact Compensator to Reduce Pressure Pulsations in Hydraulic Systems
A Novel Concept for a Fast Switching Positioning Actuator
A novel high efficiency electro-hydrostatic flight simulator motion system
A Novel Linear Motor with Movable Integrated Permanent Magnets
A Novel Piezoelectric Hybrid Solid-liquid Actuator
A Novel Piezoelectric Hybrid Solid-liquid Actuator
A Novel Piezoelectric Hydraulic Pump
A novel seat valve with reduced axial forces
A novel system layout for extended functionality of mobile machines
A Novel Valve Concept Including The Valvistor Poppet Valve
AN OVERVIEW ABOUT ACTIVE OSCILLATION DAMPING OF MOBILE MACHINE STRUCTURE
AN OVERVIEW ABOUT ACTIVE OSCILLATION DAMPING OF MOBILE MACHINE STRUCTURE
AN OVERVIEW OF MAGNETO- AND ELECTRO-RHEOLOGICAL FLUIDS AND THEIR APPLICATIONS IN FLUID POWER SYSTEMS
ANTI-CAVITATION ANALYSIS IN A FOUR-VALVE INDEPENDENT METERING CONFIGURATION CONTROLLING A HYDRAULIC CYLINDER
A numerical model for the simulation of a special poppet valve
A numerical model for the simulation of flow in hydraulic external gear machines
A Parameter Study of a Digital Pump
A Piezoelectric Micropump Using Resonance Drive: Proposal of resonance drive and basic experiments on pump characteristics
A Pneumatic Climbing Robot for Inspection Tasks
A Pneumatic Force Reflector in Bilateral Control System
A Pneumatic Library for AMESim
A PORTABLE FLUID POWER SIMULATION MODEL LIBRARY AND ITS APPLICATION
APPLICABILITY OF A LAMINAR FLOW BASED MODEL IN PIPEFLOW MODELLING OF WATER HYDRAULIC SYSTEMS
Applicability of servopneumatic positioning systems for high loads
APPLICATION OF A COMBINED SLIDING MODE CONTROLLER AND FILTER (SMCF) TO AN ELECTROHYDRAULIC ACTUATOR (EHA) SYSTEM
Application of a Neural Network in a Hydraulic Servo Systemwith a Flexible Load
Application of an Optimal Control Synthesis Strategy to an Electro-Hydraulic Positioning System
Application of Bond Graph Notation in Modelling of Nonstationary Temperature Field
Application Of CFD To Design A Power-Saving Hydraulic Directional Two-Land-Four-Way Valve
Application of dc Servomotor on Airflow Measurement
Application of Differential Evolution in system identification of a servo-hydraulic system with a flexible load
Application of Electrohydraulic Direct Digital Servo in Metal Extension Test Machine
Application of Fluid Power Devices in Active Vibro-control Systems
Application of Hydraulic Power Unit and Accumulator Charging Circuit for Electricity Generation and Storage and Distribution
Application of Hydraulic Power Unit/Flywheel Power for Electricity Generation and Storage and Distribution
Application of hydraulic sine generator to active vibration control
APPLICATION OF NEURAL NETWORKS IN HYDRAULIC CONTROL SYSTEMS
APPLICATION OF PARALLEL CONTROL SYSTEM IN MANIPULATOR'S WORK VISUALIZATION PROCESS
Application of proportional seat valves to a self-energising electro-hydraulic brake
Application of Singular Perturbation Theory to Hydraulic Servo Drives - System Analysis and Control Design
Application of the Electro-hydraulic Servo System in the Metallurgical Machinery
Application of the Fourier transform for actuator leakage diagnosis
Application of the PIV Method to Optimization of the Internal Channels of Gerotor Pumps
Application of Wavelet Analysis and Fractal Geometry for Fault Diagnosis of Hydraulic Pump
Applications of Haptic Joystick in Control of Electrohydraulic Drives
Applications of Modelling and Simulation in Mechatronics and Fluid Power System Design - Education and Research
APPLYING SELF-ORGANIZING MAPS TO CONDITION MONITORING OF FLUID POWER SYSTEMS
APPROACH FOR ENERGY-SAVING OF PNEUMATIC SYSTEMS
A PRECISE STEADY-STATE MODEL OF DISPLACEMENT MACHINES FOR THE APPLICATION IN VIRTUAL PROTOTYPING OF POWER SPLIT DRIVES
A PRECISION DRIVING SYSTEM COMPOSED OF A HYDRAULIC CYLINDER AND HIGH-SPEED ON/OFF VALVES
A proposal to compare electro-pneumatic continuous control valves: required main characteristics
A QUALITATIVE STUDY OF BIODEGRADABLE HYDRAULIC FLUID USE IN SMALL CONSTRUCTION EQUIPMENT
A quasi-single pass test method for fluid power filters
A Real Time Adaptive Control Algorithm for a VVVF Hydraulic Elevator Using Neural Nets
A REDUCED ORDER MODEL FOR A LAMINAR TRANSMISSION LINE FLOW
A reduced-order model for a poppet-type relief valve
A Reliability (Dependability) Analysis and Testing of the Airplane Hydraulic System (in Czech)
A Review of Activities for Automation in Mobile Machines
A Robust Hydrostatic Thrust Bearing for Hydrostatic Machines
A Self-Tuning Fuzzy Control of an Electro-Hydraulic Fin Position Servo System
A simple model of piston-cylinder gap efficiency in positive-displacement hydraulic pumps and motors
A Simple Novel Approach to Active Vibration Isolation With Electrohydraulic Actuation
A Simulation Study on the Back Thrust of Water Jet
A Simulation Study on the Impact of Material Properties on Piston/Cylinder Lubricating Gap Performance
A simulation study to reduce noise of compact power-split-drive transmissions
A STUDY OF GAP FLOW CONDITIONS BETWEEN THE PISTON AND THE CYLINDER OF AN AXIAL PISTON PUMP
A Study of Pneumatic Pipes Modeling
A STUDY ON COMPOUND GEAR PUMP
A STUDY ON TELE-REHABILITATION SHARING SYSTEM FOR WRIST BASED ON INTERNET
A Study on the Boom Energy Regeneration System for a Hybrid Excavator
A Study on the Design Parameter of Pressure Control Valve for Continuously Variable Transmission
A Study on the Use of Simulation as a Design Tool Applied to a Commercial Proportional Valve Group
A Study on Water Hydraulic Unloading Relief Valve
A Suggestion of Artificial Filter Test Dust
A Survey of Hydraulic Fluid Analysis Methods
A SYSTEMATIC METHODOLOGY FOR OPTIMAL COMPONENT SELECTION OF ELECTROHYDRAULIC SERVOSYSTEMS
A Systematic Philosophy Consideration on the Fluid Power Driven and Control Technology
A Test Rig for an Adaptive Magneto-Rheological Fluid Bearing and an Analytical Model of its Load Carrying Capacity
A Test-Rig for the Characterisation of Fast Check Valves
A TIME ENCODED SIGNAL PROCESSING/NEURAL NETWORK APPROACH TO FAULT CLASSIFICATION OF AN ELECTROHYDRAULIC CONTROL SYSTEM
A Two Regime Orifice Flow Formula for Numerical Simulation
A Unified Force Controller for a Proportional-Injector Direct-Injection Monopropellant-Powered Actuator
Auto-Loopshaping Control of Electro-hydraulic Servo Fatigue Testing Machine
Automatic Derivation of Symbolic State Equations for Mechatronic Systems
Automatic Design of Proportional Valve Spools
Automatic Generation of Simplified Models
Automatic Level Control in Agricultural Machinery
AUTOMATIC RECOGNITION OF HYDRAULIC COMPONENT SYMBOLS IN TECHNICAL DRAWINGS
AUTOMATION OF A MECHANICAL CHILDBIRTH SIMULATOR USING ELECTROPNEUMATIC COMPONENTS
Automotive Design for Electro−Hydraulic Proportional Valves in Mobile Applications
Autonomous Cleaning Robot Working in Unstructured Environment
A Validated Modular Model for Hydraulic Actuation in a Pushbelt Continuously Variable Transmission
A Variable-Speed Pump-Controlled Hydraulic Servo System for a Novel Pitch Control System of Wind Turbines
A Visco-Elasto-Plastic Material Law for Magneto-Rheological Liquids
Axial Clearance Compensation in Gear Displacement Machines
Axial clearance compensation in the gerotor pump
Axial Piston Pump and -Motor Optimization by Means of CFD
Backstepping sliding-mode control for a pneumatic control system
Basic Characteristics of a Silicon Outer Fence Mold Actuator with Human Compatibility
Basic Problems in Fast Hydraulic Switching Valve Technology
Basics for the Energy Efficient Control of Hydraulic Drives by Switching Techniques
Basics for the Energy Efficient Control of Hydraulic Drives by Switching Techniques
Basics of Hydraulic Systems
BEARING LOAD ON CIRCULAR SLIPPERS: HYDRODYNAMIC AND HYDROSTATIC ASPECTS
Behaviour of MR fluids in squeeze mode
Benefit of the Asymmetrical Half Bridge on Proportional Valve Electronic Control
Big power hydraulic central loading system on board product and chemical tankers
Biogenous Hydraulic Fluids - Influences of Operations on the Filterability
Biohydraulics − True Alternatives
Bond Graph Based Approach to Passive Teleoperation of a Hydraulic Backhoe
Bond Graph Modeling and Simulation of Stick-slip Characteristics of a Pneumatic System
Bosch Rexroth Pneumatic System for Automation: Easy-2-Combine (in Czech)
Brake System Modeling for Simulation and Control
Bubble Elimination Device in Hydraulic Systems
BUBBLE ELIMINATION FOR HYDRAULIC SYSTEMS - NEW DESIGN OF HYDRAULIC SYSTEM FOR ENVIRONMENTAL COMPATIBILITY
CAD of Hydraulic Manifold Blocks Using an Object-oriented Approach
CALCULATION METHOD FOR THERMAL-HYDRAULIC SYSTEM SIMULATION
Calculation of the energy efficiency of a modern hydraulic injection moulding machine
Calculation on the Critical Back Pressure of Pneumatic Ejector Circuit
CASCADE NONLINEAR CONTROL OF PNEUMATIC ACTUATORS WITH APPLICATION TO THE AEROMOVEL TRANSPORT SYSTEM
CASPAR Based Slipper Performance Prediction in Axial Piston Pumps
Cavitation
Cavitation Driven Impact in a Hydraulic Piston Pump
Cavitation Driven Impact in a Hydraulic Piston Pump. - A Theoretical and Experimental Investigation.
CDIO-CONCEPT FOR ENGINERING EDUCATION IN FLUID POWER, MOTION CONTROL AND MECHATRONIC DESIGN
Centrifugal Compressor Dynamics and Software System for Surge Control
CFD ANALYSIS AND OPTIMIZATION OF A COMPENSATED SPOOL VALVE GEOMETRY
CFD ANALYSIS OF A FLOW CONTROL VALVE
CFD Analysis of a Novel High Speed Rotary On/Off Valve
CFD ANALYSIS OF A PNEUMATIC VALVE METERING SECTION
CFD ANALYSIS OF A TORQUE DETECTED TYPE FLOW METER
CFD Analysis of Flow Forces on Direct Acting Relief Minivalves
CFD Analysis of Flow Forces on Spool Valves
CFD ANALYSIS OF PILOT OPERATED RELIEF VALVE
CFD Analysis of the Intake Manifold of a Hydraulic Circuit
CFD Simulation of Compressible Fluid Flows Using Conservation Element Method
CFX/Simulink co-simulation of a wave energy converter
Challenges for the International Fluid Power Community
Changing the Paradigm
Characteristics Analysis of Suspending System in Static Balancing Machine for Marine Propeller
Characteristics of digital hydraulic pressure reducing valve
Characteristics of Proportional Control Valve Using Tap Water
Characteristics of Teleoperated Skid Steered Mobile Machine
Characterization and Attenuation of Sandwiched Deadband Problem Using Describing Function Analysis and Application to Electrohydraulic Systems Controlled by Closed-Center Valves
Combined Controller for Test System of High Capacity Hydraulic Pump
Combined Heat and Air Generation – A Technical Study
Combining Leakage and Orifice Flows in a Hydraulic Servovalve Model
COMPARASION OF PISTON AND BLADDER HYDRO-PNEUMATIC ACCUMULATORS PROPERTIES
COMPARATIVE TESTS OF MICROPROCESSOR CONTROLLED LOW SPEED HYDRAULIC MOTORS IN THE RANGE OF LOW ROTATION SPEEDS
Comparative Tribological Investigations of Continuous Control Valves for Water Hydraulics
Comparing Control Methods of Feed Force
Comparing Hybrid Power Transmission Systems of Work Machines
Comparison of Cavitation Erosion Test Results Between Vibratory and Cavitating Jet Methods
COMPARISON OF CAVITATION EROSION TEST RESULTS BETWEEN VIBRATORY AND CAVITATING JET METHODS
Comparison of Digital Hydraulic and Traditional Servo System in Demanding Water Hydraulic Tracking Control
Comparison of EMA and HA performance for dynamic load simulators
Comparison of Linear, Nonlinear, Hysteretic, and Probabilistic Models for Magnetorheological Fluid Dampers
Comparison of Present Methods of Hydraulic Oils Filtration Technology (in Czech)
Comparison of Slipper Structures in Water Hydraulic Axial Piston Pump
Comparison of software for simulation of fluid power systems
Comparison of Three Different Concepts for a Variable Valvetrain for Huge Combustion Engines
Comparison of Three Different Concepts for a Variable Valvetrain for Huge Combustion Engines
COMPARISON OF VARIOUS DESIGNS OF SOLID BODY COMPENSATORS FOR THE FILTERING OF FLUID FLOW PULSATIONS IN HYDRAULIC SYSTEMS
Comparison of Various Forms of Oscillators for the Compensation of Fluid Flow Pulsations in Hydraulic Systems
Compensation of Variable System Dynamics to Enhance Condition Monitoring for Hydraulic Pumps
Compositional modelling of fluid power systems using predictive tradeoff models
Comprehensive Compensation for the Disturbance Torque of Electro-hydraulic Load Simulator
Compressibility Measurements of Hydraulic Fluids in the Low Pressure Range
Compressible bench flow adaptations to the experimental characterization of pneumatic components. Application to the determination of flow-rate characteristics of a MPYE- 5-3/8-010-B proportional valve
Computational Fluid Dynamics Analysis of Rotary Blood Pump with Hydrodynamic Bearings
Computationally Efficient Time Domain Modelling of Fluid Transmission Lines
COMPUTATIONAL MODELS FOR EFFECTIVE BULK MODULUS OF HYDRAULIC FLUID
Computational Study of the Influence of Roughness on the Friction Behaviour of Step Seals
Computation of Hydrostatic Guideway of Vertical Lathe Ram and Test Equipment Design (in Czech)
Computer Aided Conceptual Design, a Concept Study of Fast Hydraulic 2/2-Way Seat Valves
Computer Aided Design and Optimization of a Test Rig for Magneto-Rheological Fluid Behaviour
Computer Aided Development of a New Bernoulli Gripper
COMPUTER AIDED OPTIMIZATION OF BEARING AND SEALING GAPS IN HYDROSTATIC MACHINES - THE SIMULATION TOOL CASPAR
COMPUTERIZED GENERATION OF NOVEL GEARINGS FOR INTERNAL COMBUSTION ENGINES LUBRICATING PUMPS
Computer Program for Mathematical Modeling and Identification of Hydrodynamic Processes of a Radial Piston Pump
Computer Program for the Design of Hydraulic Machines’ Pumping Set with Internal Involute Gearing
Computer Simulation of the Performance of Digital-Displacement Pump-Motors
CONCEPTION OF MOBILE ROBOT WITH HYDROSTATIC DRIVE STEERING BY PLUS+1 MODULE
CONCEPT OF ACTIVE COUNTERWEIGHT SYSTEM FOR MEDIUM EXCAVATOR
Concerning: Research and Development in Fluid Power Technology
Condition monitoring and fault diagnosis for vane pumps using flow ripple measurement
Condition Monitoring for Hydraulic and Lubricating Fluids
Condition monitoring of aircraft fuel pumps using pressure ripple measurements
Condition Monitoring of Pneumatic Systems Using Self−Organising Maps
CONDITION – MONITORING – SYSTEM FOR HYDRAULIC FLUIDS
Construction Machines and Manipulators - Modern Designs and Research Problems
Construction of On-Line Monitoring and Fault Diagnosis System for Large Scale Complicated Hydraulic Equipment
Contact Mechanics for Randomly Rough Surfaces with Applications
Containing the cup in the floating cup axial piston machine
Continuous CMAC and its Application in Identification of Electrohydraulic Servo System
Contrapropagating Ultrasonic Flowmeter Using Clad Buffer Rods for High Temperature Measurements
Contributions to Automatic Level Control in Agricultural Machinery
Contributions to Magneto-Rheological Fluid Applications in Squeeze Mode
Control and Identification of Vortex Wakes
CONTROL BASED ON NEURAL NETWORK STRATEGY FOR A HYDRAULICALLY DRIVEN PARALLEL MANIPULATOR
Control Concept for Hysteresis Free Behaviour of Proportional Solenoid
Control Design for Relative Stability in a PWM-Controlled Pneumatic System
Controllability and Observability Analysis of the Liquid Water Distribution Inside the Gas Diffusion Layer of a Unit Fuel Cell Model
CONTROLLED VALVE PLATE IN BENT AXIS HYDRAULIC MOTORS
Controlling a conventional LS-pump based on electrically measured LS-pressure
CONTROL OF A PNEUMATIC SERVOSYSTEM USING FUZZY LOGIC
CONTROL OF A SERVOPNEUMATIC DRIVE WITH FRICTION COMPENSATION
Control of Deep-Hysteresis Aeroengine Compressors
CONTROL OF HYDROSTATIC MULTISOURCES POWER SYSTEMS IN TERM OF SELECTED CRITERIA
Control of Interface of HIL Simulator for Hydromechanical Machines
CONTROL OF MOBILE HYDRAULIC CRANES
Control of vane pump delivery by the deadbeat controller
Control of Water Turbine Guide Apparatus by Use of Water Hydraulic Actuator
Control-Oriented Modeling of Transcritical Vapor Compression Systems
Control Strategies for Load-Sensing in Mobile Machinery
Control Strategy for Water Hydraulic Driven Hybrid Parallel Robot
Control System Development for the Water Hydraulic 6−DOF Motion Platform
CONTROL SYSTEM OF DOUBLE ACTING SINGLE ENDED CYLINDER SIMULATION – CONCEPT OF WATER TURBINE GUIDE APPARATUS CONTROL
Coordinated Position Control of Five Hydraulic Cylinders Based on High Speed On/Off Valves
Coupled Simulation for the Virtual Product Development of Electro-Hydraulic Valves
Coupling Simulations of Hydraulic Systems with Characteristic Method and CFD
Cross utilizing degree of freedoms of boom in energy saving concept
Current Trends and New Applications in Motion and Positioning Control Solutions for Earthmoving and Construction Equipment
'CYCLOIDAL GEAR MACHINES' OPTIMAL DESIGNING OF INNER CHANNELS IN GEROTOR PUMPS
DAMPING AUGMENTATION OF FLEXIBLE STRUCTURES — A ROBUST STATE SPACE APPROACH—
DATA MINING ENHANCEMENT IN MODEL BASED FAULT CLASSIFIERS OF A HYDRAULIC CYLINDER DRIVE
Decentralized Coordinated Motion Control of Two Hydraulic Actuators Handling a Common Object
DERIVATION OF DESIGN REQUIREMENTS FOR OPTIMIZATION OF A HIGH PERFORMANCE HYDROSTATIC ACTUATION SYSTEM
Design and Analysis of a New Underwater Robot for Autonomous Cleaning Water Pool
Design and Control of Chemomuscle: A Liquid-Propellant-Powered Muscle Actuation System
Design and Dynamic Analysis of High Speed on/off Poppet Valves for Digital Pump/Motors
DESIGN AND EXPERIMENTAL EVALUATION OF POSITION CONTROLLERS FOR HYDRAULIC ACTUATORS: BACKSTEPPING AND LQR-2DOF CONTROLLERS
Design and Fabrication of Actuation System Using Functional Fluid
Design and hybrid control of the pneumatic force-feedback systems for Arm-Exoskeleton by using on/off valve
Design and implementation of a water hydraulic 6-DOF motion platform for real-time simulators
Design and Implementation of Energy Saving Digital Hydraulic Control System
Design and Mathematical Modelling of High Frequency Hydraulic Switching Valves Driven by Parametrically Excited Structures
Design and optimisation of a novel hydraulic free piston engine with liquid-propellant-power
Design and Optimization of a Hydraulic Hybrid System Using Multistroke Radial Piston Pump/Motor
Design and Performance Characterization of a Vane Motor Hydraulic Pump
DESIGN AND SENSITIVITY ANALYSIS OF A SINGLE-STAGE ELECTRO-HYDRAULIC SERVOVALVE
Design and Simulation Study of the Measuring Device for Hydraulic Oil Bulk Modulus
Design and Validation of Digital Controllers for Hydraulics Systems
DESIGNING THE CHANNELS AND THE INNER CLEARANCES IN GEROTOR PUMPS
DESIGN METHODOLOGY FOR FLUID POWER SYSTEMS AND PRODUCTS SYNERGY, INTEGRATION AND BALANCE
DESIGN OF A HYDRAULIC SERVO SYSTEM FOR ROBOTIC MANIPULATION
Design of a Hydraulic System for Liquid Packaging
Design of a Hydrogen Production and Power Generation System Based on the Reaction of Aluminum with Water
Design of a Lyapunov Controller for an Electro-hydraulic Actuator During Contact Tasks
Design of a New Pressure Regulator with Electronic Control: Friction Forces Analysis
Design of a Nonlinear Adaptive Controller for an Electrohydraulic Actuator
Design of an Undulate Foot Robot
Design of a Train Separator for Hydraulic Capsule Pipeline Control
Design of a vibration-isolated cushion to reduce the noise and vibration of a hydraulic breaker
DESIGN OF CASCADE CONTROLLERS FOR A HYDRAULIC ACTUATOR
Design of Electro-hydraulic Control System for Walking Beam Mill Furnace
Design of Fluid Chambers in Control Unit of Variable-displacement Pump
Design of Hydraulic Systems for Automotive Applications
Design of integrated pressure,-flow and temperature sensor for hydraulic systems
Design of Modern Hydraulic Tank Using Fluid Flow Simulation
Design of Objective Functions for Optimization of Multi-Domain Systems
Design of Proportional Anti-Saturative Load-Sensing Control Blocks
Design of Single Stage Pressure Relief Valve Using Time Domain Simulation and CFD Analysis
Design of the Pneumatic Servo-actuators of a 3 d.o.f. Motion Simulator
Design optimization of a special relief valve with response surface methodology
Design Optimization of Harvester Head and Actuation System of Forest Harvester
Design Optimization of the Sliding Elements of External Gear Machines
Design Principles for Proportional Pressure Reducing Valves in Mobile Applications
Design, virtual prototyping and test of a regenerative shock absorber for race cars
Detecting and influence of cylinder mounting backlash in a hydraulic position servo
Detection of Cylinder and Valve Leakage in Hydraulic Position Servo
Detect of piston seal leakage in pneumatic position servo cylinder drive
Determination of flow forces in hydraulic valves
Determination of Flow Rate Characteristics of Pneumatic Solenoid Valves Using an Isothermal Chamber
DETERMINATION OF K COEFFICIENTS FOR IRREGULAR FLOW PASSAGES IN HYDRAULIC MANIFOLDS
Determination of Optimal Lifetime for Hydraulically Equipped Sappers Machines (in Czech)
Determination of Relief Valve Characteristics by the Use of CAD System and CFD Tools
Determination of the Operational Point for the Pneumatic System Sizing
Determining the probability of performance and stability for a metering poppet valve
Deterministic Surface Texturing for the Tribologic Contacts in Hydrostatic Machines
Developement of Multi−Machine Remote Control Platform
DEVELOPING AND TAILORING A CFD CODE FOR MULTIPHASE MULTICOMPONENTS FLOWS
Developing Fluid Technical Mechatronic Systems with Increased Efficiency Using the Principles of Lean Innovation
Developing intelligent hydraulic excavator
DEVELOPMENT AND CONTROL OF ENERGY SAVING HYDRAULIC SERVO DRIVES
DEVELOPMENT AND CONTROL OF ENERGY SAVING HYDRAULIC SERVO DRIVES
Development and Control of Energy Saving Hydraulic Servo Drives for Mobile Systems
Development and Implementation of an Advanced Power Management Algorithm for Electronic Load Sensing on a Telehandler
Development and Investigation of High-Speed Pneumatic Jet Valves by Lumped Parameter Modeling
Development and Laboratory Tests of a Cheap, Robust, and Fast Check Valve for Industrial Applications
Development and Simulation of Lubrication Test System for Port Plate/Cylinder Block in Axial Piston Pump
Development, Conceptual Design and Experimental Verification of a Novel Switching Type Hydraulic Actuator for Energy-Saving Fast Positioning
Development Environment for Fluid-Power-Mechatronic Systems
DEVELOPMENT OF ACCURATE AND PRACTICAL SIMULATION TECHNIQUE BASED ON THE MODAL APPROXIMATIONS FOR FLUID TRANSIENTS IN COMPOUND FLUID-LINE SYSTEMS
DEVELOPMENT OF ACCURATE AND PRACTICAL SIMULATION TECHNIQUE BASED ON THE MODAL APPROXIMATIONS FOR FLUID TRANSIENTS IN COMPOUND FLUID-LINE SYSTEMS (2ND REPORT: ENHANCEMENT OF ANALYTICAL FUNCTIONS FOR GENERALIZATION)
DEVELOPMENT OF A COMPACT AND TUNEABLE VIBRATION COMPENSATOR FOR HYDRAULIC SYSTEMS
DEVELOPMENT OF A CONTROL CONCEPT FOR A HYDROSTATIC DRIVE WITH OPTIMIZED PRIMARY POWER CONSUMPTION
Development of a direct pressure-sensing pressure-reducing valve for water hydraulics
Development of a Fast Low-Cost Switching Valve for Big Flow Rates
Development of a Fast Operating Clutch for Linear Movements
Development of a Fast Seat Type Switching Valve for Big Flow Rates
Development of a Fault Simulator for Proportional Spool Valves
DEVELOPMENT OF A HIGH-SPEED ON/OFF DIGITAL VALVE FOR HYDRAULIC CONTROL SYSTEMS USING A MULTILAYERED PZT ACTUATOR
DEVELOPMENT OF A HYDRAULIC MASTER-SLAVE SYSTEM FOR TELEROBOTICS
DEVELOPMENT OF A HYDRAULIC TELE-OPERATED CONSTRUCTION ROBOT USING VIRTUAL REALITY - NEW MASTER-SLAVE CONTROL METHOD AND AN EVALUATION OF A VISUAL FEEDBACK SYSTEM
Development of a Hydrostatic Transmission for Wind Turbines
Development of a Miniature Air Compressor Driven with a Linear Electromagnetic Actuator
Development of an Accelerated Ageing Test for Hydraulic Spool and Poppet Valves
DEVELOPMENT OF AN AUTOMATED CAMBER CONTROL SYSTEM FOR THE ROUGHING STANDS OF A HOT STRIP MILL
Development of an expert system for electrohydraulic motion control design
Development of a Novel High Pressure Electronic Pneumatic Pressure Reducing Valve
Development of an Ultra Fast Emergency Stop Valve
Development of a Picking Device of an Orange Harvesting Machine
DEVELOPMENT OF A PNEUMATIC FORCE-DISPLAY (APPLICATION TO A MASTER-SLAVE SYSTEM)
Development of a Pressure−compensated Flow Control Valve for Water Hydraulics
DEVELOPMENT OF A QUIETER VARIABLE-DISPLACEMENT VANE PUMP FOR AUTOMOTIVE HYDRAULIC POWER STEERING SYSTEM
DEVELOPMENT OF A ROBUST CONTROLLER FOR A PRESSURE CONTROL UNIT
Development of A Self−energising Electro−Hydraulic Brake (SEHB) for Rail Vehicles
Development of a Servomotor Driven Proportional Valve
Development of a Simulation Model of the Main Hydraulic Components and System for Metal Diaphragm Type Hydrogen Compressor
Development of a Test Method to Examine the Fuel Characteristic Influences on Reliability of Commercial Burner Pumps with a Tribological Test Apparatus
Development of a Virtual Prototype of Piston Pump for Hydrostatic Transmission
Development of CNC bending machine using Parallel Kinematics Mechanism (PKM)
Development of Demining Vehicle
DEVELOPMENT OF FIELD ROBOT (VEHICLE DEVELOPMENT AND FUNDAMENTAL RUNNING CHARACTERISTICS ANALYSIS)
Development of Hybrid Control of Electrohydraulic Torque Load Simulator
DEVELOPMENT OF INTELLIGENT EXCAVATOR
Development of New Spiral Robot
DEVELOPMENT OF NUMERICAL MODEL FOR A SELF-LEVELING SHOCK ABSORBER
Development of Riding Simulator
Development of the Energy Efficient Electro-Hydraulic System for Excavator
Development of Water Hydraulic Manipulator for the Remote Handling of Heavy Duty Components
Development of Wearable Power Assist Device Using Curved Pneumatic Artificial Rubber Muscle
Diagnostics and Visualization in Hydraulic Press
Differential PWM Operated Solenoid Valves in the Pilot Stage of Mini Excavators: Modeling and Identification
Digital Clay: User Interaction Model for Control of a Fluidically Actuated Haptics Device
Digital control design and simulation in hydraulics. An integrated approach
Digital Hydraulics – Towards Perfect Valve Technology
Digital Hydraulic Transformer – Efficiency of Natural Design
DIGITAL ROBUST CONTROL OF THROTTLED VARIABLE DISPLACEMENT HYDRAULIC MOTORS IN AIRCRAFT POWER DRIVE UNITS
DISPLACEMENT CONTROLLED LINEAR ACTUATOR WITH DIFFERENTIAL CYLINDER - A WAY TO SAVE PRIMARY ENERGY IN MOBILE MACHINES
Distance Education MS In Engineering: Fluid Power Engineering
Distributed Control Structure of Rolling Mill Based on Fieldbus
DLM/FD Simulation on the Motion of a Charged Particle in a Micro-channel
Double Acting Hydraulic Shock Absorber at Wheel Suspension Vehicles (in Czech)
Driving Feel Generation of the Mobile Machine Simulator with the Water Hydraulic 6-DOF Motion Platform
Dual Electrohydraulic Servo Motors Synchrodrive System Using Adaptive Neural Control Strategy
Dynamical performance of a fast magnetorheological (MR) valve
Dynamic Analysis of an Electro-hydraulic Proportional Speed Control System with a Single-rod Hydraulic Actuator
Dynamic Analysis of a Pneumatic Digital Valve through Ansys/Matlab-Simulink Cosimulation
DYNAMIC ANALYSIS OF HYDRAULIC RECEIVERS CONTROLLED IN THE PROPORTIONAL TECHNIQUE
Dynamic behavior of an electrohydraulic valve: Typology of characteristic curves
Dynamic Behavior of Complex Fluid-Filled Tubing Systems—Part 1: Tubing Analysis
Dynamic Behavior of Complex Fluid-Filled Tubing Systems—Part 2: System Analysis
Dynamic Constraint-Based Energy-Saving Control of Pneumatic Servo Systems
Dynamic Effects in Mobile Manipulators with Hydraulic Systems
Dynamic mesh modelling of a direct acting relief valve
Dynamic Model for a Dome-Loaded Pressure Regulator
Dynamic Modeling of a Magnetorheological Rotation Rheometer
Dynamic Modeling of a Monopropellant-Based Chemofluidic Actuation System
Dynamic Modeling of a Piezoelectric Actuated Fuel Injector
Dynamic Modeling of Capsule Separator for Control of Hydraulic Capsule Pipelines
DYNAMIC MODELLING AND PARAMETRIC STUDIES OF AN INDEXING VALVE PLATE PUMP
Dynamic Modelling of CVT Power Train
Dynamic Model of CVT Power Train
Dynamic Performance of Excavator Joystick Driven by Pneumatic Cylinder (Basic Study of Robot for Excavator)
Dynamic Redesign of a Flow Control Servovalve Using a Pressure Control Pilot
Dynamic response of a hydraulic servo-valve torque motor with magnetic fluids
Dynamic Simulation of a Large Hydraulic Capsule Pipeline System
DYNAMIC SIMULATION WITH TEST VERIFICATION FOR SOLVING AND UNDERSTANDING FLUID POWER SYSTEM PROBLEMS
Dynamics of a Large Scale Hydraulic Capsule Pipeline System
Dynamics of Cilia-Based Microfluidic Devices
Dynamics of Mechanical Hydraulic Junctures of Aircraft Controls (in Czech)
DYNAMIC STABILITY OF A PIPE SUBJECTED TO A PULSATING FLOW
Dynamic Testing of Servohydraulic Equipment
DYNAMIC THERMAL MODEL OF A DISCHARGING PROCESS OF A PNEUMATIC CHAMBER
Ecological Fluid Power Units-Ekoextrem (in Czech)
EFFECT OF CAVITATION IN WATER HYDRAULIC POPPET VALVES
EFFECT OF CONTROLLER IN REDUCING STEADY-STATE ERROR DUE TO FLOW AND FORCE DISTURBANCES IN THE ELECTROHYDRAULIC ACTUATOR SYSTEM
Effect of Fiber Additives on Flow in Journal Bearings
Effect of Fluid Inertia on Stability of Hydrodynamic Bearings
EFFECTS OF GEOMETRIC IMPERFECTIONS AND PERIPHERAL GROOVING ON GAP FLOW IN PROPORTIONAL SPOOL VALVES
Effects of Temperature on Proportional Valve Dynamics and Reliability
Effects of the Variation of Torque Motor Parameters on Servovalve Performance
Efficiency Analysis of a Digital Pump/Motor as Compared to a Valve Plate Design
Efficiency Improvement of Fluid Power Components Focusing on Tribological Systems
Efficiency Measurement and Modeling - Essential for Optimizing Hydrostatic Systems
EFFICIENCY OF UV-IRRADIATION AND FILTRATION IN CONTROLLING MICROBIAL GROWTH IN WATER HYDRAULIC SYSTEMS
Efficiency Optimisation of Tracked Vehicles Using Secondary Control in a Single-Circuit Load Sensing System
Efficiency study of an excavator hydraulic system based on displacement-controlled actuators
EFFICIENT COLLABORATIVE MODELLING AND SIMULATION WITH APPLICATION TO WHEEL LOADER DESIGN
Efficient Hydraulics in Mobile Machines - Very Competitive Technologies
Efficient Methods for Numerical Modeling of Laminar Friction in Fluid Lines
Efficient Regeneration
Efficient, Safe and Reliable Recuperation: Regenerative Accumulator in Honeycomb Receiver
Ein Beitrag zur Anwendung der Singulären Störungstheorie beim Entwurf nichtlinearer Regelungen für hydraulische Servoantriebe
Elastic Beams with Identical Buckling and Vibration Mode Shape
Electric hydrostatic drive – a concept for the clamping unit of a high-speed injection moulding machine
ELECTROHYDRAULIC CONTROLLER AS A HYDROTRONIC ELEMENT OF DRIVING SYSTEM
Electro-hydraulic Control System of Shield Tunnel Boring Machine for Simulator Stand
Electro-Hydraulic Dual-Circuit System to Improve the Energy Efficiency of Mobile Machines
Electrohydraulic Fully Flexible Valve Actuation System With Internal Feedback
Electro-Hydraulics of the Stage Tables of the Lower Theater Scene (in Czech)
Electro-hydraulic Technique Based Obstacle-avoidance System of Multi-DOF Complicated Mechanical Arms
ELECTRONICALLY CONTROLLED HYDRAULIC BUCKET STABILIZER FOR MOBILE MACHINE
Electronically Controlled Hydrostatic Travel Drive of Rubber - Tyred Roller (in Czech)
Electronic Flow Control Valve (EFCV) with Pressure Compensation Capability
Electronic Hybrid Limiter (EHL) for Pump Displacement
Electronics in Mobile Hydraulics (in Czech)
Electropneumatic Test Bench for Aeronautics Application: Robust Control
Enabling Autonomous Functions on Hydraulic Excavator Attachment
End Effectors in the Automation Industries under Energetic Aspects - A Holistic Approach
ENERGY CONSUMPTION ANALYSIS OF AN INNOVATION VVVF CONTROLLED HYDRAULIC ELEVATOR
Energy Consumption of the Hydraulic Circuit of a Mid-Size Power Tractor
Energy Dissipation Of The Hydraulic Circuit Of Remote Auxiliary Utilities Of An Agricultural Tractor
Energy Efficiency Analysis in Pneumatic Plants for Food Processing
ENERGY EFFICIENCY OF HYDRAULIC SYSTEMS WITH HYDRAULIC CYLINDER UNDER PROPORTIONAL CONTROL
Energy Efficiency of Mobile Working Machines
Energy Efficient Control of Multiactuator Digital Hydraulic Mobile Machine
Energy-Efficient Design and Dimensioning of Rolling Bearing Supports in Gearboxes
Energy Efficient Switching Control by a Hydraulic Resonance Converter
Energy Losses in Piston Type Hydraulic Accumulator
Energy Management Strategy For a Hydraulic Hybrid Vehicle using Stochastic Dynamic Programming
Energy Optimal Open Loop Control of Standard Pneumatic Cylinders
Energy recovery of hydraulic elevator using accumulator
Energy Recovery Systems in Small Scale Reverse Osmosis Seawater Desalination Plants
ENERGY RECUPERATION IN HYDROSTATIC TRANSMISSION SYSTEM
Energy recuperation in working hydraulics of excavators
Energy Regenerative Actuator for Motion Control With Application to Fluid Power Systems
Energy Saving by Use of an Active Coutnerweight System for Medium Size Excavators
Energy saving hydraulic actuators for mobile machines
ENERGY SAVING HYDRAULIC DISPLACEMENT CONTROLLED LINEAR ACTUATORS IN INDUSTRY APPLICATIONS AND MOBILE MACHINE SYSTEMS
Energy Saving in Pneumatic Servo Control Utilizing Interchamber Cross-Flow
Energy Saving in Pneumatic Systems; Historical Overview and Current Status
Energy-Saving Method of Pneumatic Servo Position Control System Based on Separate Control of Motion Trajectory and Pressure Trajectory
Energy storing and recovering in loading and unloading cycles of forward loader
Enhanced control performance of a piezoelectric-hydraulic pump actuator for automotive transmission shift control
Enhanced Performance and Stability in Pneumatic Servosystems With Supplemental Mechanical Damping
Entropy Generation Reduction in a Rotor -casing Assembly using Inlet and Outlet Fillets
Equalization techniques for dual redundant electrohydraulic servoactuators for flight control systems
Erosion due to Impingement of Submerged Cavitating Jets in Tap Water, Biodegradable and Mineral Oils
ESTABLISHING OPERATING POINTS FOR A LINEARIZED MODEL OF A LOAD SENSING SYSTEM
Estimation of stresses in components and gap in active contacts of epitrochoid generated floating axis ROPIMA type hydrostatic units- an FEM approach
EVALUATION AND VALIDATION OF AN AIR SPRING ANALYTICAL MODEL
Evaluation of Effective Bulk Modulus of Oil in Hydraulic Dampers - Effects of Cylinder Shell Elastic Deformation
Evaluation of Energetic Possibilities and Ecological Characteristics of IC Engine and Hydrostatics Transmission System for Spectrum Form of Load
Evaluation of Linear and Non-Linear Control Schemes Applied to a Hydraulic Servo System
Experiences of Fluid Flow Modelling in the Design of Mobile Hydraulic Oil Tanks
Experimental Analysis of HIL Simulator with Flow/Pressure Interface
Experimental and Control Research on Pressure Impact during Spool Shifting of Directional-control Valves
Experimental and modelling research of load compensated hydrostatic driving systems
Experimental and Numerical Analysis of the Flow Forces on an Open-Centre Directional Control Valve
EXPERIMENTAL AND NUMERICAL INVESTIGATION FOR DOWNSIZING OF OIL RESERVOIR BY BUBBLE ELIMINATOR
Experimental and Numerical Investigation of the Squeeze Mode of Magneto-Rheological Fluids
EXPERIMENTAL AND SIMULATION RESULTS OF APPLYING FUZZY GAIN- SCHEDULING IN POSITION CONTROL OF A SERVO HYDRAULIC SYSTEM WITH FLEXIBLE LOAD
Experimental and theoretical study of the electrical failures in a fault-tolerant direct-drive servovalve for primary flight actuators
Experimental assessment of a free elastic-piston engine compressor with separated combustion chamber
Experimental Based Analysis of the Pressure Control Characteristics of an Oil Hydraulic Three-Way On/Off Solenoid Valve Controlled by PWM Signal
Experimental-based Modelling and Simulation of Water Hydraulic Mechatronics Test Facilities for Motion Control and Operation in Environmental Sensitive Applications' Areas
Experimental Characterization and Gray-Box Modeling of Spool-Type Automotive Variable-Force-Solenoid Valves With Circular Flow Ports and Notches
Experimental Characterization of Critical Dynamic Model Parameters for a Free Liquid Piston Engine Compressor
Experimental Evaluation of a Metering Poppet Valve
Experimental Evaluation of a Piston-Type Digital Pump-Motor-Transformer with Two Independent Outlets
Experimental identification of inertail and friction parameters for electro-hydraulic motion simulators
Experimental Implementation of a Neural Simulator
Experimental investigation and theoretical prediction of the lubricity of biofuel components
EXPERIMENTAL INVESTIGATION OF THE DYNAMIC PROCESSES AND PARAMETERS IDENTIFICATION IN ELECTROHYDRAULIC POWER SYSTEM
Experimental investigation on a hydraulic special poppet valve
Experimental Investigation on Flow Characteristics of Annular Gap Damper in Water Hydraulics
Experimental Investigation on Swash plate - Piston slipper Lubrication in Hydrostatic Units
EXPERIMENTAL INVESTIGATIONS OF GUIDE RINGS MADE OF UHMWPE AND PTFE COMPOSITE IN WATER HYDRAULIC SYSTEMS
Experimental Measurement and Numerical Simulation of the "Inter-Teeth Space Pressure" in External Gear Pumps
Experimental Measurements of Static Friction for Line Contacts at High Speed Step Inputs
Experimental Research for Flowing Characteristics of Liquid in Micro Channels
Experimental Studies of Flows Inside Gerotor Pumps with Use of High-speed Digital Camera
Experimental Study of Sealing Capability of Large Diameter Rotary Face Seals for Fluid Power Applications in Process Industry
Experimental Study on Cavitation Characteristics of Water Hydraulic Orifice
Experimental Study on Electrification Phenomena in Dielectric Liquid Flows over Metal Walls
Experimental Study on Orifice-Liquid Distributor
Experimental Study on the Performance of Large Diameter Shaft Seals with Laser Micro-structured Counterface
Experimental study on the use of a dynamic neural network for modelling a variable load sensing pump
Experimental Study on the Wear Characteristics of Polyetheretherketone (PEEK) Slipper with Different Swashplates under High Load and High Speed
Experimental Validation of Mathematical Models of Hydraulic Pipelines with High-Frequency Excitation
Experimental Validation of Pipeline Models for Laminar and Turbulent Transient Flow
Experimental Validation of Theoretical and Numerical Models of a DDV Linear Force Motor
Experiment Demonstrating of Oil contamination On-line Monitoring System Based on the Filter Membrane and Fill-Up Method Theory
Experimenting with Electrical Load Sensing on a Backhoe Loader
Exploitation of Hydraulic Multifunctional Testing System Based on VC++
Fast Actuation of Hydraulic Switching Valve by Parametrically Excited Structures
Fast Development and Rapid Prototyping of a Compact Fast 3/2 Way Switching Valve
Fast Hydraulic Switching Valves - Key Components for the Introduction of Switching Techniques in Oil Hydraulic Drives
Fast Pointing Control for Systems With Stick-Slip Friction
Fault Classification Based on Self−Organizing Maps in Water Hydraulic Forklift
Fault Detection And Diagnosis of Digital Hydraulic Valve System
Fault Detection of Simulated Servo Hydraulic System by Utilizing Artificial Neural Network (ANN)
Fault Diagnosis of a Pneumatic Subsystem
Fault diagnosis of pneumatic systems
FAULT TOLERANCE OF DIGITAL HYDRAULIC VALVE SYSTEM WITH SEPARATELY CONTROLLED FLOW PATHS
Filter and Particle Simulation for Hydraulic Systems
FINITE ELEMENT MODELING AND SIMULATION OF A MAGNETORHEOLOGICAL (MR) VALVE
FLATNESS BASED CONTROL OF A FAST SWITCHING HYDRAULIC DRIVE
Flexible Pneumatic Actuators for Underwater Robot
Flow Analysis and Modeling of Shock Absorbers
Flow Analysis in Control Valve Using a Vortex Method
Flow characteristics measurement of large valves
Flow Characteristics of Pressurized-Water in Annular Micro-Clearance
Flow Characteristics of the Piezoelectric Driven Pneumatic Valve for Grain Sorter
Flow Control Concept of Submerged Ballast Pumps with Hydraulic Drive Supplied from Hydraulic Central Loading System on Modern Product and Chemical Tankers
Flow Controlled Variable Displacement Hydraulic Motors for Highly Efficient Aircraft Actuation Systems
Flow Field in a Pipe with Sudden Expansion by FEM Method
FLOW FORCES ANALYSIS ON A FOUR-WAY VALVE
Flow mass monitoring of potato harvest on laboratory conditions
Flow pulsation reduction for variable displacement motors using cross-angle
Flow pulsation reduction for variable displacement motors using cross-angle
Flow ripple reduction in power steering hydraulic pumps
Fluid Aeration as an Essential Problem in Modelling of Hydraulic Systems
FLUID BORNE NOISE CHARACTERISTICS OF A GEROTOR PUMP MEASUREMENT AND PREDICTION
FLUID DYNAMIC BEHAVIOUR OF AN INTERNAL ROTARY PUMP GENERATED BY TROCHOIDAL PROFILES
Fluid Dynamics − Comparison and Discussion on System−Related Differences
Fluid Power Actuators for Structural Control - An Overview
Fluid Power - a Way Forward
FLUID POWER CONTROL UNIT USING ELECTRORHEOLOGICAL FLUIDS
Fluid Power Systems and Mechatronics (in Czech)
Fluid Power Systems in Downhole Seismic Exploration
Fluid Power Technology - Progress or Plateau?
Fluid Transmission Line Modeling Using a Variational Method
Flux Observer for Spool Displacement Sensing in Self-sensing Push-Pull Solenoids
FMEA MATRIX METHOD IN ANALYSIS OF HYDRAULIC SYSTEMS
Force Balancing Control of Multi- Electro Hydrostatic Actuators for an Aircraft
Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control
Force control at low cost in pneumatic field
Force control for hydraulic load simulator using self-tuning grey predictor - fuzzy PID
Force Control Loop Affected by Bounded Uncertainties and Unbounded Inputs for Pneumatic Actuator Systems
Force control of a roller-screw electromechanical actuator for dynamic loading of aerospace actuators
Fork Lift with Free Piston Engine
Formation of Pressure Gain in Hydraulic Servovalves and its Significance in System Behavior
FREQUENCY DOMAIN MODELLING AND IDENTIFICATION OF 2D DIGITAL SERVO VALVE
Frequency Tuning of Chain Structure Oscillators to Place the Natural Frequencies at Omega1 and N-1 Integer Multiples Omega2 ... OmegaN
FRICTION COMPENSATION FOR SECONDARY CONTROL LOAD SIMULATOR BASED ON FUZZY CONTROL
Friction Forces Within the Cylinder Bores of Swash-Plate Type Axial-Piston Pumps and Motors
Friction of Pneumatic Actuator Seals and its Finite Element Analysis
From Component Supplier to Solution Provider
Fully Integrated Electric−Hydrostatic Drive Based on a Gear Pump And a Switched Reluctance Motor
Fundamental Research on Hydraulic Oil Pumping Unit with Power Recovery
Fundamentals of Fluid Power Control
Fuzzy Sky-Ground Hook Control of a Tracked Vehicle Featuring Semi-Active Electrorheological Suspension Units
FUZZY VARIABLE STRUCTURE CONTROL BASED ON EVOLUTIONARY ALGORITHMS FOR HYDRAULIC SERVO SYSTEM
Fuzzy Variable Structure Position Control of a Pneumatic Muscle Actuator System
GAP FLOW INVESTIGATION OF THE PISTON CYLINDER ASSEMBLY IN AXIAL PISTON PUMPS CONSIDERING EHD EFFECTS
Generating Vibration with Artificial Muscles
Generic Tyre Model for Driving Dynamic Simulations of Off-Road Vehicles
Geometric Design for a Gerotor Pump With High Area Efficiency
Geometry Assessment of Variable Displacement Vane Pumps
Geometry based design of high dynamic servo-pneumatic valves
GEOMETRY BASED DESIGN OF HIGH DYNAMIC SERVO-PNEUMATIC VALVES
GEROTOR PUMP WITH HYDRAULIC COMPENSATION OF AXIAL CLEARANCE
Haptic-Eneabled Control of Hydraulic Manipulators Applied to Power Line Maintenance: Concept and Implementation
HAPTIC ENHANCEMENT OF HYDRAULIC EQUIUPMENT
Hardware-in-the -Loop Simulation Experiments with a Hydraulic Manipulator Model
High Accuracy Positioning and Synchronizing Two Hydraulic Cylinders in a Hydraulic Press Brake
High Efficiency at 200−2000 rpm and 10−30 MPa: Vane−In−Groove Pumps with Adaptive Rotor
Higher-order sliding modes for an electropneumatic system: differentiation and output-feedback control
High-frequency axial vibration in a combined pump unit with gear stage
Highly Durable and Abrasion Resistant Superhydrophobic Organoclay Nanocomposite Films
High Performance Digital Hydraulic Servo System for Linear Cyclic Motion
HIGH PRECISION CONTROL SYSTEM FOR HYDRAULIC CYLINDER
High Precision Hydrostatic Actuation Systems for Micro- and Nanomanipulation of Heavy Loads
High-pressure properties of hydraulic fluids - measuring and differences
High-Speed Switching Valves Actuated by Parametrically Excited Structures
Homotopy perturbation analysis of slider bearing with Powell-Eyring fluid
HOW CASE-BASEDMETHODS CAN AUTOMATE FLUIDIC CIRCUIT DESIGN
How to Handle Auxiliary Functions in Energy Efficient, Single Pump, Flow Sharing Mobile Systems
H¥ Pi Plus Feedforward Controller Design for an Electrohydraulic Actuator (EHA) System
Hybrid Analytical/Neural Network Model of Variable Displacement Pump Dynamics
Hybrid Particle-Element Bond Graphs for Impact Dynamics Simulation
HYBRID PRESSURE CONTROL CONCEPT FOR A SPEED VARIABLE AC MOTOR PUMP IN AEROSPACE APPLICATION
Hydraulic Accumulators as Key Components in Energy Efficient Mobile Systems
Hydraulically Foldable Wind Energy Plant for Regions Susceptible to Storm Hazards
HYDRAULIC AND TRIBOLOGICAL INVESTIGATION OF INJECTION SYSTEMS FOR FUELS FROM BIOMASS
HYDRAULIC BRIDGE FOR PRESSURE CONTROL IN A P-Q MULTIPLE LINE SEGMENT CONTROL VALVE
Hydraulic Circuit Test Device of Directional Vehicle Control (in Czech)
Hydraulic controlled polyester-based micro adaptive mirror with adjustable focal length
Hydraulic Control Systems - System Design and Analysis
HYDRAULIC DAMPING DEVICE IN SERVOSOLENOIDS
Hydraulic drive control concepts with two 3/3-way valves in contrast to classical 4/3 valve
HYDRAULIC DRIVE CONTROL CONCEPTS WITH TWO 3/3- WAY VALVES IN CONTRAST TO CLASSICAL 4/3 VALVE
Hydraulic Drives Control Use Non-Robust and Robust Control Algorithms
Hydraulic Drives Control Use Non-Robust and Robust Control Algorithms
Hydraulic Flow Compensator for Fast Switching Devices
Hydraulic Fluid Quality in Aircraft Hydraulic Systems
Hydraulic Fluid Viscosity Selection for Improved Fuel Economy
Hydraulic Hybrid Transmission Design Considerations for Optimal Customer Satisfaction
Hydraulic Intelligent Instrument Based on the Double CPU Sharing RAM Technology
Hydraulic Manifold Hole Checking Using Real-coding Genetic Algorithm
HYDRAULIC-MECHANICAL ENERGY SAVING SYSTEM IN CRANES AND TRANSPORTATION EQUIPMENT
HYDRAULIC OIL FLOW WALL SHEAR EFFECT ON VALVE ACTUATOR FLOW FORCES
Hydraulic Power Brakes with ABS for Tractors and Mobile Equipment Innovative Power Brake – Safely on track with ABS
Hydraulic proportional valves - evaluation of changes in performance characteristics for condition monitoring purposes
Hydraulic Servo System With Mechanically Adjustable Compliance
Hydraulics of the Antarctic Station Neumayer III
Hydraulic Switching Control With a Nonlinear Converter
Hydraulic System For Steer-By-Wire (in Czech)
Hydraulic Systems for Deep-Sea Applications
Hydraulic Systems in the Context of the New EU Machinery Directive (2006/42/EC)
Hydraulic Systems Sizing Using Bond Graphs
Hydro-Mechanical Control of a Self-Energising Hydraulic Brake
Hydro-Mechanical Model of Electro-Hydraulic Servovalve Based on Bond Graph
Hydrostatically discharged commutation unit and it’s impact on axial pump’s performance
Hydrostatic Systems of Wind Power-Stations (in Czech)
Hydrostatic Transmission as a Part of Closed Loop Control
IBIS - Advanced Multi-functional Machinery for Outdoor Applications
IDENTIFICATION OF MATHEMATICAL MODEL OF THE VEHICLE WATER HYDRAULIC DRIVE SYSTEM
Identification of pneumatic artificial muscle manipulators by a MGA-based nonlinear NARX fuzzy model
Identifying a Nonlinear Dynamic System with Partially Recurrent Neural Networks - Feasibility Study and Issues on Error Accumulation Problems
IHT Controlled Serial Hydraulic Hybrid Passenger Cars
Impact Control in Hydraulic Actuators
Impact of cylinder block-shaft coupling design on behaviour of cylinder block-valve plate sealing gap interface
Impedance Control of Redundant Manipulators
Implementation of Rosenbrock Integration Algorithm with Adaptive Step Size Control in Time-Domain Simulation of Fluid Power Systems
IMPLEMENTATION OF SINGLE FEEDBACK CONTROL LOOP FOR CONSTANT POWER REGULATED SWASH PLATE AXIAL PISTON PUMPS
Improved Functionalities and Energy Saving Potential on Mobile Machines Combining Electronics with Flow Sharing Valve and Variable Displacement Pump
IMPROVED LOSS MODELING OF HYDROSTATIC UNITS – REQUIREMENT FOR PRECISE SIMULATION OF MOBILE WORKING MACHINE DRIVELINES
Improved Performance of Over Centre Valve System Utilizing Negative Flow Force Characteristics
Improved Tracking Control of Hydraulic Systems
Improvement in feedback signal quality for water hydraulic manipulator
IMPROVEMENT OF POSITION CONTROL PERFORMANCE FOR A HYDRAULIC ROTARY ACTUATOR SYSTEM USING STATE FEEDBACK NEURAL NETWORK CONTROLLER WITH DITHER SIGNALS
IMPROVEMENT OF THE OPERATING CHARACTERISTICS OF MARINE LOW PRESSURE HYDRAULIC MACHINES
Improvements of Quickness in High Speed On-Off Valve
Improving and Appraising on Training Algorithm of Neural Network in Soft Measurement of Dynamic Flow
Improving Characteristics of On/off Solenoid Valves
Improving characteristics of switching hydraulic system based on high-speed on/off valves
Improving efficiency in a linear cyclic motion
Improving Energy Utilization in Hydraulic Booms - What It Is All about
IMPROVING GAS DYNAMIC MODELS FOR PNEUMATIC SYSTEMS
IMPROVING THE DYNAMIC BEHAVIOUR OF AXIAL PISTON PUMPS BY MEANS OF A GENERIC SIMULATION APPROACH
Independent force control of pneumatic McKibben actuators using the multiplexing technique
Independent Identification of Friction Characteristics for Parallel Manipulators
Individual metering fluid power systems: chahhenges and opportunities
Industrial Compressed Air Usage – Two Case Studies
Industrial Digital Control in Undergraduate Fluid Power Courses: a Student-Centred Approach Using an Active Suspension Test Rig
Inertial Force Display Using Pneumatics for Whole Body Haptic Interface
Influence of Air Temperature Change on Equilibrium Velocity of Pneumatic Cylinders
Influence of assembly process on efficiency of a charge pump of axial piston machine
Influence of Compressibility of Fluid on Force of Vane in High Pressure Intra-Vane Type Pump
Influence of Hydro-Grinding at the Piloting Stage of a Common Rail Injector
Influence of Pressure Control on the Power Output of a Wave Power Plant
Influence of the Experimental Procedure on the Resulting Mass Flow Rate Characteristic of a Single Pneumatic Component
Influences of supply pressure and servo valve size on accuracy of position servos
Influencing parameters on tightness of hydraulic seat valves
Innovation of Electro-Hydraulic Systems of Forming Machines (in Czech)
Innovative Drive and Control Technology for Fluid Pumps
Innovative Servo-Cartridges for presses and diecasting machines
Innovative solution for the design, simulation, and documentation of fluid power and automated systems
Instability Due to Interacting Hydraulic and Mechanical Dynamics in Backhoes
Instantaneous Flow Rate Measurement of Ideal Gases
Instantaneous Liquid Flow Rate Measurement Using the Dynamic Characterisitics of Laminar Flow in Circular Pipes
Instantaneous Liquid Flow Rate Measurement Utilizing the Dynamics of Laminar Pipe Flow
Intake Air Path Diagnostics for Internal Combustion Engines
Integrated Electric-Hydraulic Drives for Power and Motion Control
Integrated Safety in Closed-Loop Controlled Electro-Hydraulic Drives
Integrated System ID and Control Design for an IC Engine Variable Valve Timing System
Intelligent Control for Artificial Damping in Hydraulic Crane Systems under Load Dynamics
Intelligent Microprocessor-based Multiple Channels Temperature Controller
Intelligent Oil Flow Management with EFM: The Potentials of Electrohydraulic Flow Matching in Tractor Hydraulics
Intelligent switching control of a pneumatic muscle robot arm using learning vector quantization neural network
Interaction Between Secondaries in a Thermal-Hydraulic Network
Internet-based Bilateral Force-feedback Telecontrol of Hydraulic Master-Slave Robot
Internet-based Collaborative Design for Hydraulic System
In-the-Loop Method for Control Strategy Development and Virtual Commissioning
Inverse Simulation of an Aerospace Redundant Electro-Hydraulic Actuator
Investigation of Elastic Deformations of Cylinders within the Simulation of Piston-Cylinder- Contacts of Axial Piston Machines
Investigation of Experimental Techniques for the Measurement of the Effective Bulk Modulus of Oil-Filled Pipes and Hoses
INVESTIGATION OF FLOW STRUCTURE INSIDE SPOOL VALVE WITH FEM AND PIV METHODS
INVESTIGATION OF LOW TEMPERATURE BEHAVIOR OF ENVIRONMENTALLY COMPATIBLE HYDRAULIC FLUIDS DUE TO AGEING
INVESTIGATION OF NOISE SOURCE REDUCTION STRATEGIES IN HYDROSTATIC TRANSMISSIONS
Investigation of Oil Contamination Monitoring System Based on Especial Filter Membrane
INVESTIGATION OF POWER LOSSES IN THE LUBRICATING GAP BETWEEN THE CYLINDER BLOCK AND VALVE PLATE OF AXIAL PISTON MACHINES
Investigation of Separate Meter-In Separate Meter-Out Control Strategies for Systems with Over Centre Valves
Investigation of the Acceleration Effect on Dynamic Friction of EHA System
Investigation of the Effects of Swashplate Angle and Suction Timing on the Noise Generation Potential of an Axial Piston Pump
Investigation of the Structure-Borne Noise Transmission Behaviour of Hydraulic Hoses
Investigation of Various Power Management Strategies for a Class of Hydraulic Hybrid Powertrains: Theory and Experiments
Investigation of Wear on a Pressure Compensator Spool in a Mobile Proportional Valve
Investigations of Electrohydraulic Servo Valves with Piezo Bender as Control Element
INVESTIGATIONS OF THE TEMPERATURE BEHAVIOUR OF THE PISTON CYLINDER ASSEMBLY IN AXIAL PISTON PUMPS
Investigations on Internal Flow of Pneumatic Vacuum Ejectors
IT AND CHINESE FLUID POWER INDUSTRY
Joint Air-Fuel Ratio and Torque Regulation Using Secondary Cylinder Air Flow Actuators
JOURNAL BEARING PERFORMANCE IN GEAR PUMPS
Key Technology of Electro-hydraulic Control System for Automatic High-speed Railway Rail-laying Machinery
Kinematic Analysis of a Swash-Plate Controlled Variable Displacement Axial-Piston Pump With a Conical Barrel Assembly
KNOWLEDGE AND REASONING: ISSUES RAISED IN AUTOMATING THE CONCEPTUAL DESIGN OF FLUID POWER SYSTEMS
Latest Development of Crankshaft Design Radial Piston Hydraulic Motors: High Torque High Speed Variable Displacement Motors for Hydrostatic Transmissions
Layout Program in the Sealing Technology
Leakage Behaviour of Four-Way Servovalve
Leakage Reduction in Fluid Power Systems
Leak Rate of Seals: Comparison of Theory with Experiment
Learning Environment for Training the Forest Machine Mechanics
Leistungssteigerung pneumatischer Komponenten
Life-Cycle Assessment of Oil 'Hydraulic' Systems for Environmentally-Sensitive Applications
Lifetime Test of New Water Hydraulic Proportional Directional Control Valve
LINEAR ACTUATOR WITH DIFFERENTIAL CYLINDER IN DISPLACEMENT CONTROL FOR THE USE IN MOBILE MACHINERY
LINKING CFD AND LUMPED PARAMETERS ANALYSIS FOR THE DESIGN OF FLOW COMPENSATED SPOOL VALVES
Load Haul Dump Vehicle Kinematics and Control
Low Ripple Solution: Vane−In−Groove Pump with Precompression.
LUBRICANT PROPERTY AND ROLLING CONTACT FATIGUE TEST OF OIL-IN-WATER EMULSION TYPE HFA-E AND OIL TOTAL AZOLLA 46 AS WORKING LIQUIDS IN HYDRAULIC SYSTEMS
LuGre model-based friction compensation and positioning control for a pneumatic actuator using multi-objective output-feedback control via LMI optimization
Machine Fault Diagnosis Using KPCA and SVM
Magnetorheological (MR) damper with a fast response time
Magneto-rheological valve-integrated cylinder and its application
Mapping of large scale fluid power system simulations on a distributed memory parallel computer using genetic algorithms
Mass Conservative Modelling of Resistances in Fluid Power System Simulation
Mathematical Analysis of Stability and Drift Behavior of Hydraulic Cylinders Driven by a Servovalve
Mathematical Modeling of a Two Spool Flow Control Servovalve Using a Pressure Control Pilot
Mathematical modelling and experimental characterization of a high dynamic servo valve integrated with piezoelectric actuator
Mathematical modelling and simulation of sliding contact vane / profiled stator of vane pump
MATHEMATICAL MODEL OF THE VALVE CONTROLLED SKID STEERED MOBILE MACHINE
Measured Characteristics of an In-line Pump with Independently Controlled Pistons
MEASURED PERFORMANCE EVALUATION OF PID AND NEURAL NET CONTROL OF A HYDRAULICALLY DRIVEN INERTIA LOAD WITH NONLINEAR FRICTION
Measurement of the Dynamic Properties of Hose Walls Required for Modelling Fluid-Borne Noise
Measurements, Analysis and Simulation of Cavitation in an Axial Piston Pump
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
Mechatronic Model and Experimental Validation of a Pneumatic Servo-Solenoid Valve
Metering poppet valve system control
METHOD OF CHARACTERISTICS FORMING OF THE MULTIFUNCTIONAL HYDROSTATIC MACHINE
METHODOLOGY FOR THE MINIATURIZATION OF HYDRAULIC COMPONENTS
METHODOLOGY OF DESIGN INTERNAL INVLOUTE GEARS APPLIED TO THE FLUID POWER PUMP
Micro Actuators Using Functional Fluids and the Systems
Micro Control Valves by Making Use of Electro-Rheological Fluids (Control of one-link manipulator with the micro ER valve)
Microflow valve control system design
MICRO MECHATRONICS SYSTEM USING FUNCTIONAL FLUID POWER - DESIGN AND FABRICATION OF MICRO PUMP AND CONNECTING TUBE
Micro sensors on flow detection of hydraulic system
Miniature Parallel Handling Machine for Future Microfactory
Miniaturized Bistable Seat Valve
MINI – EXCAVATOR PERFORMANCE PREDICTION AND VERIFICATION THROUGH EXPERIMENT
MOBILE MACHINERY BASED ON NEW DISPLACEMENT CONTROLLED LINEAR ACTUATOR TECHNOLOGY
Modal Approximation of Distributed Dynamics for a Hydraulic Transmission Line With Pressure Input-Flow Rate Output Causality
MODAL CHARACTERISTICS OF A HYDRAULIC CYLINDER AND THEIR VARIATION WITH ROD EXTENSION
Model-Based Estimation of Internal and External Forces on a Hydraulic Cylinder
Model Based Parameter Identification of a Fluid Power Component
Model-Based Pressure and Torque Control for Innovative Pneumatic Soft-Actuators
Model-Following Controller Based on Neural Network for Variable Displacement Pump
Modeling and Comparative Investigation of a Tritec Power Unit
MODELING AND CONTROL OF A DUAL-SOLENOID ACTUATOR FOR UNSTABLE VALVE
Modeling and Control of a Portable Powered Ankle Foot Orthosis
Modeling and experimental research of characteristic parameters hydrodynamic processes of axial piston pumps with constant pressure and variable flow
Modeling and Identification of a Pneumatic Muscle Actuator System Controlled by an On/Off Solenoid Valve
Modeling and Identification of Hydraulic Servo-Valves
Modeling and Identification of Lubricated Polymer Friction Dynamics
Modeling and Simulate Analysis for Micro-thermoelectric Generator
Modeling and Simulation for Requirement Generation of Heavy Vehicles Steering Gears
Modeling and Simulation of a Fuel metering system, employing a pulse width modulated unloading valve connected to a fixed displacement pump
Modeling and Simulation of a Gas Temperature Control System
MODELING AND SIMULATION OF AN AXIAL PISTON SWASH PLATE PUMP USING SIMULINK S-FUNCTIONS
Modeling and Simulation of Hydraulic Constant Flow Supplied Open Center Servomechanisms
Modeling and Validation of an In-line Hydraulic Silencer
Modeling and Verification of an Innovative Active Pneumatic Vibration Isolation System
Modeling a Pneumatic Turbine Speed Control System
Modeling, Experimentation, and Simulation of an Air-Over-Hydraulic Brake System
Modeling of Digital-Displacement Pump-Motors and Their Application as Hydraulic Drives for Nonuniform Loads
Modeling of dynamic behaviors of friction
Modeling on an electro-pneumatic cylinder actuator for nonlinear and adaptive control, with application to clutch actuation in heavy-duty trucks
Modeling, Realization, and Simulation of Thermo-Fluid Systems Using Singularly Perturbed Sliding Manifolds
Modeling the flow phenomena in gerotor pumps
Modeling the Pneumatic Subsystem of an S-cam Air Brake System
Modeling the Vacuum Circuit of a Pneumatic Valve System
Modelling and Control of a Fast Switching Hydraulic Drive
Modelling and control of a free liquid-piston engine compressor
Modelling and Control of a High Speed Hydrostatic Transmission
Modelling and Control of Hydraulically Driven Parallel Redundant Manipulator
Modelling and control of marine engineering systems
MODELLING AND CONTROL OF PNEUMATIC VANE MOTORS
Modelling and Control of Swash-Plate Dynamics
Modelling and Control Strategies and Applications for Alternating-flow Hydraulic System
Modelling and Dynamics Simulation of Pneumatic Systems by Means of RHD Resistances (in Czech)
Modelling and measurement of the compliance and friction losses of screwjack electromechanical actuators
Modelling and Optimization in Pressurized-Air Networks – A first Approach with Respect to Energy-Efficiency
MODELLING AND SIMULATING HYDRAULICALLY BALANCED EXTERNAL GEAR PUMPS
Modelling and Simulating of Jam Fault in Electro-hydraulic Proportional Valve Based on System View Software
MODELLING AND SIMULATION OF EXTERNAL GEAR PUMPS AND MOTORS
MODELLING AND SIMULATION OF INTEGRATED HYDRAULIC PROPULSION SHIP
Modelling and Simulation of Mobile Hydraulic Crane with Telescopic Arm
Modelling and Simulation of the Bearing System for Sealless Pneumatic Cylinders
Modelling and Simulation of the Elasto-Hydrodynamic Behavior of Sealing Gaps
MODELLING AND SIMULATION UTILIZED IN RESEARCH AND DEVELOPMENT OF MOBILE HYDRAULICS
Modelling a Variable Displacement Axial Piston Pump in a Multibody Simulation Environment
MODELLING FILTRATION IN WATER HYDRAULIC SYSTEM
Modelling of an automated manual transmission system
Modelling of a Switching Control Hydraulic System
Modelling of a Water Hydraulic Poppet Valve Using CFD Technique
MODELLING OF BENT AXIS AXIAL PISTON MACHINES – NEW APPROACH
MODELLING OF HYDRAULIC PIPELINE PRESSURE TRANSIENTS WITH CAVITATION AND GAS BUBBLES
Modelling of hydraulics and mechanics of a mobile machine
Modelling of Mechatronic Systems by Symbolic Computation
MODELLING OF ORIFICE FLOW RATE AT VERY SMALL OPENINGS
MODELLING OF SPOOL POSITION FEEDBACK SERVOVALVES
Modelling of Strongly Pulsating Fluid-Flow in Pipelines of Hydraulic Drives
Modelling pipeline dynamics using optimized finite element model
Modelling, Simulation and Experimental Studies on a Variable Displacement Radial Piston Pump Prototype for Automotive Applications
Modelling, simulation and identification of the electro-hydraulic speed governors for Kaplan turbines by AMESim
Modelling, simulation and identification of the electro-hydraulic speed governors for Kaplan turbines by AMESim
MODEL ORIENTED CONDITION MONITORING OF HYDROSTATIC TRANSMISSION
Model Predictive Control of a Fuel Injection System with a Radial Basis Function Network Observer
Model Predictive Energy Management of a Hybrid Hydraulic Vehicle
Model Recognition and Simulation of an E/H Steering Controller on Off-Road Equipment
Model Reduction in Hydraulics by Singular Perturbation Techniques
Modern Electrohydraulic Drive Technology for Stationary Machinery in Industrial Automation
Modern Hydraulic Solutions for Production Machines (in Czech)
Modern Hydrostatic Drive Systems in the Light of Dynamical Systems Theory
Mode Switching And Energy Recuperation In Open−Circuit Pump Control
Modified Generalized Predictive Control of Networked Systems With Application to a Hydraulic Position Control System
Monitoring of hydraulic systems parameters on the agricultural machines
Monopropellant-Driven Free Piston Hydraulic Pump for Mobile Robotic Systems
Motion Control for Overconstrained Parallel Servohydraulic Mechanisms
Motion Control in Offshore Applications
MOVEMENT OF THE CUPS ON THE BARREL PLATE OF A FLOATING CUP, AXIAL PISTON MACHINE
Multifunction Hydrostatic Machine as a rotational speed changer
Multi-objective Optimization Tool for Noise Reduction in Axial Piston Machines
Multiple Sliding Mode Control for an Electrohydraulic Actuator System
Multiple-surface sliding controller design for pneumatic servo systems
Nanoscale Friction Dynamic Modeling
Negative Load Sensing
Network-Based Concurrent Engineering-Oriented Simulation Software for Hydraulic System
Neural Adaptive Control of a MIMO Electrohydraulic Servosystem
Neural Network Compensated Model-Based Controller for Fluid Power Driven Machines
Neurons Adaptive Control Based on Sliding Mode Control Optimized by Fuzzy Logic Inference Applied on a Hydraulic Actuator System
New concepts and design of high response hydraulic valves using piezo technology
NEW DESIGN OF TRIBOLOGICAL SYSTEMS OF AXIAL PISTON PUMPS WITH COATINGS AND ENVIRONMENTALLY FRIENDLY FLUIDS
New Developments in the Field of Electrohydraulic Drive Technology
New Directions in Elastohydrodynamic Lubrication to Solve Fluid Power Problems
NEW DISPLACEMENT CONTROLLED LINEAR ACTUATOR TECHNOLOGY – A SUITABLE CONTROL ELEMENT FOR ACTIVE OSCILLATION DAMPING
New electro-hydraulic control systems for mobile machinery
New Fluid Qualification Test Results Carried out by a Combination of Flywheel and MPH Tests
New Hydraulic Products and Technology in Kayaba Industry CO., Ltd.
New Innovative Components for Energy Efficient Working Hydraulics in Mobile Machines
New Nonlinear Robust Control Concept for Electro-Hydraulic Drives
NEW RESULTS IN CONTROL SYNTHESIS FOR ELECTROHYDRAULIC SERVOS
New Swash Plate Damping Model for Hydraulic Axial-Piston Pump
New Trends Required New Hydraulic Media
Next generation simulation software using transmission line elements
NNPID Applied in the Hydraulic AGC System
NOISE REDUCTION IN AXIAL PISTON MACHINES BASED ON MULTI - OBJECTIVE OPTIMIZATION
NOISE REDUCTION IN AXIAL PISTON MACHINES BASED ON MULTI-PARAMETER OPTIMIZATION
Noise Reduction of Axial Piston Pumps using Variable Reversing Valves
Nonlinear Adaptive Learning for Electrohydraulic Control Systems
Nonlinear Adaptive Robust Control of One-Dof Electro-Hydraulic Servo Systems
Nonlinear Control of Hydraulic Servo Drives Based on a Singular Perturbation Approach
Nonlinear Dynamic Model of a Two-Stage Pressure Relief Valve for Designers
Non-Linear Dynamics of a Hydraulic Piston Pump Model with Long Suction Line and Cavitation
Nonlinear Force/Pressure Tracking of an Electro-Hydraulic Actuator
Nonlinearity and Feedback Compensation Method in a Pneumatic Vibration Generator
Nonlinear Model-Based Control of Pulse Width Modulated Pneumatic Servo Systems
Nonlinear Optimal Control of a Hydraulically Actuated Positioning System
Nonlinear Robust Control of an Electro-hydraulic Positioning System
Numerical Analysis of a Measure to Improve the Suction Performance of Hydrostatic Pumps
Numerical Analysis of the Dynamic Behaviour of Piston Journal Bearing in Axial Piston Pumps and Motors
Numerical Analysis of the Flow Field around a Ribbed Helix Lip Seal
Numerical analysis of the hydraulic circuit of a commercial common rail diesel fuel injection system
Numerical Analysis of the Lateral Forces Acting on Spools of Hydraulic Components
Numerical analysis of the lubricating gap between bushes and gears in external spur gear machines
Numerical and Experimental Analysis of the Hydraulic Circuit for the Rear Hitch Control in Agricultural Tractors
Numerical and Experimental Analysis of the Hydraulic Circuit for the Rear Hitch Control in Agricultural Tractors
Numerical and Experimental Investigation of Cavitating Flow in Water Hydraulic Seat Valve
NUMERICAL CHARACTERIZATION OF PIPES AND HOSES DYNAMIC RESPONSE
Numerical Control of the Electrohydraulic Servomechanisms
Numerical Modeling of Unsteady Flow, Cavitation and Noise Generation in Hydraulic Valve (in Czech)
NUMERICAL OPTIMIZATION OF A DISTRIBUTOR VALVE
Numerical Simulation and Experimental Investigation on Turbulent Flow Characteristics in the Circulative Impinging Stream Reactor
Numerical Simulation and Experiments on the Flow in a Multistage Centrifugal Pump
Numerical Simulation of Friction at Hydraulic Rod Seals
Numerical simulation of pulsating flow in resonator hose based on measured data of wave speed
Numerical simulation of the 3-D turbulent steady compressible flow in type “T” junctions and experimental validation of the total pressure loss coefficient
Numerical Study of Joule Heating Effect on Electroosmotic Flow in Rectangular Microchannels with Different Aspect Ratios
Numerical Study on the Axial Flow Force of a Spool Valve
Offshore Hydraulics
Oil stiction in hydraulic valves – an experimental investigation
Oily High Bulk Modulus Fluid of New Concept for Hydraulic Fluid
On 3D Viscid Periodic Wave Propagation in Hydraulic Systems
ON A FRF BASED EXPERIMENTAL SUB STRUCTURING TECHNIQUE FOR LINEAR VIBRATING SYSTEMS
On Cavitation Characteristics of the Shapes in Water Hydraulic Seat Valves
ON CAVITATION IN FLUID POWER
ONE-DEGREE-OF-FREEDOM MODEL FOR TORQUE-MOTOR DYNAMICS
One pneumatic line based inchworm-like micro robot for half-inch pipe inspection
On Fluid Power Control by Switching Techniques
On-line condition monitoring of a radial LSHT motor in a pulp washer application
On-Line Identification of Deformation Resistance and Mill Stretch Coefficient for Cold Rolling Mills
On-Off Control With Specified Fuel Usage
On Soft Sensing for Instantaneous Flow in Hydraulic System
On stability and dynamic characteristics of hydraulic drives with distributed vales
On Switching Techniques for Hydraulic Drive Systems
On the Application of an Industrial Motion Controller to a Pneumatic Positioning System
On the Bulk Modulus of Hydraulic Fluids in the Presence of Dissolved Gas
ON THE CONTROL OF JOINT INTEGRATED SERVO ACTUATORS FOR MOBILE HANDLING AND ROBOTIC APPLICATIONS
ON THE DEVELOPMENT OF A REAL-TIME SIMULATOR ENGINE FOR A HYDRAULIC FORESTRY MACHINE
On the Dynamic Behavior of Servo-Hydraulic Drives
On the Limitations of Force Tracking Control for Hydraulic Servosystems
On the Observability of Pressure in a Pneumatic Servo Actuator
On the Passivity of a Galerkin Finite Element Model For Transient Flow in Hydraulic Pipelines
On The Pressure Peak Minimization in Digital Hydraulics
On the Stability and Performance of Two-Stage Hydraulic Servovalves
On the Transient of Pressure Waves in Ducts for Systems Operating in Industrial Automation
On the Use of Block Backward Differentiation Formula Methods for the Simulation of Fluid Power Systems
On Ultrasonic Detecting-Based Dynamic Flow Measurement Technology
On Using Unstable Electrohydraulic Valves for Control
OPEN CIRCUIT SOLUTION FOR PUMP CONTROLLED ACTUATORS
Operating Strategies and Valve Requirements for Digital Pump/Motors
Operator Efficiency Improvements From Novel Human-Machine Interfaces
OPTICALLY POWERED HYDRAULIC PILOT VALVE USING PIEZOELECTRIC MULTILAYER ACTUATOR
Optimal Control for Bouncing Suppression of CNG Injectors
Optimal Control of a Parallel Hydraulic Hybrid Vehicle Powertrain
OPTIMAL CONTROL OF HYDRAULICALLY ACTUATED FLEXIBLE MULTIBODY SYSTEMS
Optimal Design of a High-Speed On/off Valve for a Hydraulic Hybrid Vehicle Application
OPTIMAL RESPONSE OF PRESSURE REDUCERS AND STABILITY INFLUENCES OF THE DOWNSTREAM LINE DYNAMICS
Optimisation of a Hybrid Diesel-Hydraulic Automotive Powertrain using ADVISOR, Matlab and Simulink.
Optimisation of Piezo Common Rail Injector Robustness with Simulations
OPTIMISATION OF THE PROPORTIONAL SOLENOIDS FOR ELECTROHYDRAULIC CONTROL SYSTEMS
Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger Vehicle
Optimization and energy consumption of Electro-Hydraulic Valve Actuation system through valve event timing range
Optimization Methods for Valves Design (in Czech)
Optimization of a Fast Switching Valve for Big Flow Rates
OPTIMIZATION OF HYDRAULIC COMPONENTS USING FLUID-SOLID INTERACTION SIMULATION
Optimization of Hydraulic Systems by Means of Numerical Simulation
Optimization of Liquid Piston Dynamics for Efficiency and Power Density in a Free Liquid Piston Engine Compressor
Optimization of Parameters of Pseudo-Dynamic Solver for Real-Time Simulation of Fluid Power Circuits
Optimization of Performance Characteristics of Electropneumatic (Two-Stage) Servo Valve
OPTIMIZATION OF PNEUMATIC POWER SERVO – MECHANISM MADE COMPLETELY FROM POLYMERIC MATERIALS
OPTIMIZATION OF THE POWER MANAGEMENT STRATEGY FOR A HYDRAULIC HYBRID VEHICLE
OPTIMIZATION OF THE WATER HYDRAULIC INTENSIFIER PUMP USED IN THE WATER JET CUTTING SYSTEM OF PAPER MACHINE
OPTIMIZATION PERFORMANCE OF A MICROFLUID FLOW POWER CONVERTER
Optimized pace drive concept for glass panel conveyors
Optimized Piston Guidance Design for Swash Plate Pumps
Optimizing the PPV Setting in a Pneumatic System
Overcoming of self-excited oscillations and noise in hydraulic jet pipe servo-valve using magnetic fluid
Parameter Identification as a Tool for Fluid Power System Development
Parameter Identification for a High-Performance Hydrostatic Actuation System Using the Variable Structure Filter Concept
Parameter Sensitivity Analysis for Force Control in Gold Wire Bonding Process
PARAMETRISED DYNAMIC MODEL OF A 4-WAY SPOOL VALVE - AN EXPERIMENTAL STUDY
Parker’s new line of pilot operated servo proportional valves reduces cycle times and improves product quality
Partially Continuously Variable Power-Split Transmission for Wheel Loaders
PASSIVE BILATERAL TELEOPERATION OF A HYDRAULIC ACTUATOR USING AN ELECTROHYDRAULIC PASSIVE VALVE
Passive Tele-operation of Pneumatic Powered Robotic Rescue Crawler
Passivity-Based Impact and Force Control of a Pneumatic Actuator
Passivity of Fluid Transmission Line Models
Payload Estimation In Four Wheel Drive Loaders
PCCI Control Authority of a Modern Diesel Engine Outfitted With Flexible Intake Valve Actuation
PCM Control in Mobile Hydraulics
Performance Characteristics of Magneto-Rheological Dampers for Semi-Active Structural Control
PERFORMANCE LIMITATIONS OF A CLASS OF TWO-STAGE ELECTRO-HYDRAULIC FLOW VALVES
Phase-Shift High-Speed Valve for Switch-Mode Control
Physically Correct Hydraulic System Simulation with Mass Conservative Approach
Physical Modelling of the Hydraulic Drive (in Czech)
Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance
Piloting the valve spool by using a through axial shaft
PIPING ELEMENTS MODELLING OF CENTRAL GREASE LUBRICATION SYSTEM
Pneumatic Cabin Suspension for Mobile Agricultural Machines
Pneumatic Component Characterization: Use of Measured Stagnation Pressures
PNEUMATIC LANDSLIDE GENERATOR
Pneumatic Positioning System of Process Valves
Pneumatic Positioning System of Process Valves
Pneumatic servo valve models based on artificial neural networks
Pneumatic servovalve models using artificial neural networks
Portable Remote Control for Teleoperated Hydraulic Mobile Machine
Position Control of a Cylinder Using a Hydraulic Bridge Circuit With ER Valves
POSITION CONTROL OF A PNEUMATIC SERVO CYLINDER USING FUZZY-SLIDING SURFACE CONTROLLER
Position control of high performance hydrostatic actuation system using a simple adaptive control (SAC) method
Positioning Control of a Hydraulic Press by a Variable Speed Motor
Position tracking control of a clamp-cylinder for energy-saving injection moulding machines with electric-hydrostatic drives
Position Tracking Control of a Miniature Water Hydraulic Rotary Actuator
POSSIBILITIES OF MODERNIZATION OF A PNEUMATIC MANIPULATOR CONTROL CIRCUIT
Possibilities of Numerical Modeling of Fluid Flow in the Hydrodynamic Coupling (in Czech)
Possible Methods for Biodynamic Feedthrough Compensation in Backhoe Operation
Potential of Cyberspace with Virtual Reality and Soft Computing for Advancing Fluid Power Development
Potentials of a Numerical Tool for the Simulation of Flow in External Gear Machines
POWER BALANCE IN HYDRAULIC SATELLITE MOTORS SUPPLIED WITH OIL AND HFA - E EMULSION
Power Control for Hydrostatic Transmission System with Energy Recuperation
Power Management in Mobile Hydraulic Applications - An Approach for Designing Hydraulic Power Supply Systems
POWER MANAGEMENT IN OPEN CIRCUIT HYDRAULIC SYSTEMS
Power Management Strategy for a Parallel Hydraulic Hybrid Passenger Vehicle Using Stochastic Dynamic Programming
Power Optimization for Multi-Actuator Pump-Controlled Systems
Power Scaling Bond Graph Approach to the Passification of Mechatronic Systems—With Application to Electrohydraulic Valves
Power Transmission System Design - Modeling the Comparative Performance of Hydraulic and Electric Drives
Practical Method for Measuring Periodic Flow Rates and Impedances in Pulsating Oil Flows through a Pipe
Prediction and Improvement of Steady-State Performance of a Power Controlled Axial Piston Pump
Prediction of Coiling Temperature of Hot Rolled Strip Based on Neural Network
Prediction of Failures in Hydraulic Pumps and Assesment of Failures Effects by FMEA Method
Prediction of Pump and Motor Performance by Computer Simulation
Prediction of rotary hydrostatic drive’s volumetric losses
Preliminary Approach to the Contact Stress in a Gerotor Pump
Preliminary Design Approach of Hydrostatic Piston Motor for Achieving a User-Defined Optimal Efficiency Point
PRELIMINARY DESIGN RULES FOR ELECTROHYDRAULIC POSITION CONTROL ACTUATION SYSTEM WITH STRUCTURE COMPLIANCE
Present State and Future Development in Mechatronics and its Effect on Fluid Power Systems
Pressure and Vacuum Servo Control System Based on Vacuum Pump and Study of the System Control
Pressure based fault detection and diagnosis of a digital valve system
PRESSURE COMPONENTS STABILITY ANALYSIS: A REVISITED APPROACH
Pressure Control in a Low-pressure Casting Furnace
PRESSURE CONTROL IN BAND - SAW HYDRAULIC SYSTEM USING THE FUZZY LOGIC
Pressure control in BOSCH Common Rail injection system
PRESSURE CONTROL IN DIGITAL HYDRAULICS
Pressure Distributions in Oil Flim Between the Cylinder Block and Valve Plate in the Piston Pump
Pressure, Flow, Force, and Torque Between the Barrel and Port Plate in an Axial Piston Pump
Pressure peak phenomenon in digital hydraulic systems - a theoretical study
Pressure tracking control for a self-energizing hydraulic brake
Principle of Active Vibration Damping Using Pneumatic McKibben Type Muscle Actuator
Probability Density Function of Underwater Bomb Trajectory Deviation Due to Stochastic Ocean Surface Slope
PROBLEMS OF THE ADAPTIVE CONTROL FOR ELECTRO – HYDRAULIC SERVO - SYSTEM
Proceedings of the 4th FPNI-PhD Symposium, Sarasota, June 13-17, 2006
Proceedings of the 4th FPNI-PhD Symposium, Sarasota, June 13-17, 2006
ProChain – A Revolving Drive, Energy and Data System Based on a Block Chain
PROGRESS OF THE ON-LINE MONITORING OF THE HYDRAULIC SYSTEMS OF A HOT STEEL STRIP ROLLING MILL
Proportional Technology with Electronics on Board
Proportional Valves in Low-pressure Water Hydraulics
PROPOSAL OF A NEW BOND-GRAPH METHOD FOR MODELLING PNEUMATIC SYSTEMS
Providing Stability of Pressure Control Valve by Compensator
PSEUDO - DYNAMIC SOLUTION OF PRESSURES IN SMALL VOLUMES IN FLUID POWER CIRCUIT SIMULATION
PSH Press Drive Servo Hybrid- Servo Pump Drive System for Hydraulic Presses
Pump Controlled Actuator - a Realistic Alternative for Heavy Duty Manipulators and Robots
Pump Supply Pressure Fluctuations in the Semi−closed Hydraulic Circuit with Bootstrap Type Reservoir
Pushing the Limits − How to Improve Lifetime and Performance of Machines Running Above the Extreme
Quantitative Fault Tolerant Control Design for a Leaking Hydraulic Actuator
Radiation Effects on Friction and Leakage Properties of Water Hydraulic Seals
RADIO CONTROL SYSTEM OF EXCAVATOR DRIVE MECHANISM
Rapid Gauging Method and Generic Modelling Approach for Pneumatic Seat Components
Realisierung von Schalttechniken für Hydraulische Antriebe durch Nutzung resonanter Wellen
REALIZATION OF PROGRAMMABLE CONTROL USING A SET OF INDIVIDUALLY CONTROLLED ELECTROHYDRAULIC VALVES
REALIZING MULTIPLE INJECTION STRATEGY WITH A COMMON RAIL ELECTRO INJECTOR
Real-Time Force and Moment Estimation for Mechanical Gas Face Seal Systems Using Reduced-Order Kalman Filters
Real-time Identification using a Self-Excited Oscillation Method to an Electro-hydraulic Servo System
Recent Advances in Commercial Aircraft Hydraulic Systems
Recurrent Neural Networks for Fault Diagnosis and Severity Assessment of a Screw Compressor
Recursive generalised neural networks (RGNN) for the modeling of a load sensing pump
Reduced Order, Discrete-Time, Input-Output Modelling of Laminar Pipe Flow
Reduced Order Modelling of the Hydraulic Wave Converter
Reduced Order, Passive Models for Liquid Transmission Lines (invited paper)
Reducing Shock Absorber Cavitation with Optimized Design by Using Numerical Modeling of Oil Flow
Reduction in Air Consumption when Air-Blowing Using an Energy-Saving Nozzle
Reduction of Engine and Cooling Power by Displacement Control
Reduction of Life Cycle Cost Through Fluid Condition Monitoring
REDUCTION OF QUASI-IMPULSIVE FORCES AND NOISE EMISSION IN THREE-SCREW PUMP ROTORS
Reduction of the Bottleneck in Flexible Hydraulic Lines
Re-evaluation of ideal nozzle flow
Regeneration of Potential Energy in Hydraulic Focklift Trucks
Reluctance Networks for Simulation of Proportional Solenoids in Fluid Power Valve Systems
Removing Disturbances Caused by Undissolved Air in Real Time Online Particle Counting in Aircraft Hydraulic Systems
Renovation, Optimisation and Unification of Hydraulic Circuits and Hydraulic Systems of Mobile and the Engineering Technicals of Army of Czech Republic (in Czech)
Researches For Developing a New Type of Electro Hydraulic Brake
Researches on the Main Components of a Positive Displacement Pump by FEM
Research of Automatic Gauge Control Model in Hydraulic Screw Down System of Strip Mills
Research of High Speed Articulated Wheel Tool-Carrier Steering Systems
Research of low-speed high torque planet motors supplied with oil-in-water emulsion as working liquid
Research of new two-speed planet type gear hydraulic motors with axial clearance compensation
Research on a Stabilization and Automatic Tracking Platform with 4TPS-IPS Parallel Structure
Research on CAI Technique of Hydraulic Transmission
RESEARCH ON CLOSED-LOOP CONTROL SYSTEM OF VVVF HYDRAULIC ELEVATORS
Research on Collaborative Simulation Management for Mechatronics System
Research on Control of Pressure Reduction by Expander in High-pressure Pneumatic System
Research on Control Strategy and Work Point Optimization of Power System in Hybrid Hydraulic Excavator
Research on Fuzzy Integral Sliding Mode Control in Rolling Mill AGC
Research on High Speed Drive of Water Hydraulic Cylinder
RESEARCH ON KEY PROBLEMS IN WATER HYDRAULIC PISTON PUMP AND ITS EXPERIMENT
Research on Media-Load Active Heave Compensation System for Ocean Production
RESEARCH ON NON – MESHING FORCE GEAR PUMP
Research on Pneumatic-hydraulic Multi-channel Synchronal Loading Control System
RESEARCH ON PRESSURE DROP IN HYDRAULIC COMPONENTS BY MEANS OF CFD METHOD ON EXAMPLE OF CONTROL VALVE
RESEARCH ON PULSATION ATTENUATION CHARACTERISTICS OF SILENCERS IN PRACTICAL FLUID POWER SYSTEMS
Research on the Adaptive Fuzzy-Neural Network Control of the Large Power Controlled Start Transmission System
Research on the Diffusion in Curved Micro-channel Flow Driven by Pressure
Research on the Displacement and Stroke-bore Ratio of the Air-powered Engine
Research on the Performance Simulation of the Transmission System of Bus with Secondary Regulating Technique
Research on the Special Electrohydraulic Valve for Hydro-viscous Drive
Research on Tooth Shape Designing of Internal Gear Pumps
Research on Virtual Integration in Software Design of Hydraulic Test Stand System
RESIDUAL LIFE PREDICTION OF FLUID POWER SYSTEM COMPONENTS USING ARTIFICIAL NEURAL NETWORKS
RESIDUAL LIFE PREDICTION OF HYDROSTATIC DRIVE USING ARTIFICIAL NEURAL NETWORKS
Resolved Motion Control of a Hydraulic Loader Crane
Retrofittable Hydraulic Hybrid System for Road Vehicles
Revolution in Dynamics and Force: New Drive Technology For Proportional & Servo Valves
Rexroth camoLINE – the Cartesian Motion Building System integrates Pneumatic, Mechanic and Electric Functions (in Czech)
Rexroth Hydraulic Systems Designed for Pressure Casting Machines for Aluminium-Base Alloys (in Czech)
Robust Controller Design for a Variable Displacement Hydraulic Motor
ROBUST CONTROLLER DESIGN FOR HYDRAULIC JOINT SERVO ACTUATORS
Robust Control of a Hydraulically Actuated Manipulator Using Sliding Mode Control
Robust control of the pressure in a control-cylinder with direct drive valve for the variable displacement axial piston pump
Robust control performance comparisons for a water hydraulic servo motor system
Robust Design of a Power Steering System with Emphasis on Chattering Phenomena
Robust loop shaping-fuzzy gain scheduling control of a servo-pneumatic system using particle swarm optimization approach
Robustness Analysis of Models for Hydraulic Servo Valve by Using a Statistical Method
Robustness of Rotating Stall Control for Axial-Flow Compressors
Robust Nonlinear Control of a Novel Indexing Valve Plate Pump: Simulation Studies
Robust Nonlinear Control of Parametric Uncertain Systems With Unknown Friction and Its Application to a Pneumatic Control Valve
Robust overwhelming control of a hydraulically driven three-degrees-of-freedom parallel manipulator through a simplified fast inverse model
Robust Performance Control of Electrohydraulic Actuators for Camshaft Machining
Robust Position Control of an Electrohydraulic Actuator With a Faulty Actuator Piston Seal
Robust position control of electro-hydraulic actuator systems using the adaptive back-stepping control scheme
Robust Speed Control of a Variable-Displacement Hydraulic Motor Considering Saturation Nonlinearity
Robust Stabilization of Axial Flow Compressor Dynamics Via Sliding Mode Design
Rubber Compatibility with Biodiesel Fuel: The Effects of Blend and Fluid Temperature
SAFETY DRIVEN DESIGN OF HYDRAULIC ARCHITECTURES
SATELLITE HYDRAULIC MOTOR WITH AXIAL CLEARANCE COMPENSATION
Secondary Control Technology and Applications
Selection of Load Holding Valves with Lowest Possible Power Losses
Self-Optimizing Architecture in Mobile Machines
Self-organising maps for change detection in hydraulic systems
Self-organising maps for monitoring pneumatic systems
Self Propelled Water Hydraulic Vehicle
SELF PROPELLED WATER HYDRAULIC VEHICLE
Semi-physical Simulation Test-stand for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System
Sensitivity Analysis as a Tool for Optimization in Fluid Power Simulation
Sensorless Condition Monitoring of a Submerged Pump
Series Hydraulic Hybrid System for Urban Vehicles
Servocontrol of the GS16 Turbine Gas Metering Valve by Physics-Based Robust Controller Synthesis
Servo Pneumatic Position Control Using Fuzzy PID Gain Scheduling
Setting Control Limits for Water Contamination in Hydraulic and Lubrication Systems
SIL Approved Sensors for Mobile Machines and Innovative Technology
Simplified Modelling of a Self-Energising Hydraulic Brake
Simulation and Analysis of High-pressure Waterjet Characteristics
Simulation and Dynamical Analysis of Mechatronic Systems with the Output in the Virtual Reality World
SIMULATION AND EMBEDDED SMART CONTROL FOR FLUID POWER ACTUATORS AND ROBOTICS
Simulation and Experimental Research of Velocity Control System by use of Flow Controllers
Simulation and Test Research for Stepped Electro-hydraulic Servo Controlling System of Coiler
Simulation Model of the Thermodynamic Gas Process for Applications in Pneumatic Cylinders
Simulation of ABS Hydraulic Control Unit Matching
SIMULATION OF A ELECTROHYDRAULIC LOAD-SENSING SYSTEM WITH AC MOTOR AND FREQUENCY CHANGER
SIMULATION OF A LOCAL SOURCE OF CONCENTRATION POLARIZATION IN MEMBRANE CHANNELS
Simulation of an Ocean Wave Energy Converter Using Hydraulic Transmission
SIMULATION OF A PERIODICALLY EXCITED NONLINEAR TRANSMISSION LINE
Simulation of a Piezoelectric high-speed digital valve
Simulation of Greases Flow (in Czech)
Simulation of Hydraulic Pipeline Pressure Transients Using Matlab Simulink
Simulation of Oil Ageing
Simulation of Pneumatic Actuators at the Application Example of Windscreen Wiper Systems
SIMULATION OF THE GAP FLOW IN THE SEALING AND BEARING GAPS OF AXIAL PISTON MACHINES
Simulation Package OHC-Sim Ver.2.4 with User Customised Function
Simulation Research on Energy Saving of Hydraulic System in Hybrid Construction Machinery
Simulation Research on the Hydraulic Transformer with New Distribution Pairs
Simulations of continuous steel casting hydraulic system with application of fuzzy logic
Simulations of Energy Flow in Hydraulic Drives of Forming Machines
Simulations of Vane Pump Controller by use of the DELPHI Software Environment
Simulation Study of Quick-Forging for Heavy Load Forging Manipulator
Simulation Study on Pressure Control using Nonlinear Input/Output Linearization Method and Classical PID Approach
Simulation Study on Simulating Human Intelligent Fuzzy Control of Construction Vehicle Automatic Transmission
Simultaneous Force and Stiffness Control of a Pneumatic Actuator
Singular Perturbation Analysis of an Electrohydraulic Servo-Drive with Discontinuous Reduced Dynamics
Sliding mode control for an electrohydraulic actuator system with discontinuous non-linear friction
Sliding Mode Controller and Filter Applied to an Electrohydraulic Actuator System
Sliding Mode Control of a 2DOF Planar Pneumatic Manipulator
Sliding Mode Control of a Hydraulic Industrial Robot
Sliding Mode Flow Rate Observer Design
Sliding-Mode Observer as a Time-Variant Estimator for Control of Pneumatic Systems
Slipper Tipping within an Axial-Piston Swash-Plate Type Hydrostatic Pump
Smart Soft Stop System with SPC11
Solid Body Compensators for the Filtering of Fluid Flow Pulsations
Some Comments and Suggestions on the Future Development of Oil-hydraulics
Sound Intensity Measurements to Investigate Noise Generation of Hydrostatic Transmissions
Speed controlled drives in the field of metal forming machines
SPEED-UP CHALLENGE OF ELECTRO-HYDRAULIC VALVE ACTUATOR FOR CAM-LESS ENGINE
Stability and Motion Control of Inertial Loads with Displacement Controlled Hydraulic Actuators
STABILITY OF PRESSURE FEEDBACK IN A PILOT STAGE
Stabilizing network control for pneumatic systems with time-delays
State Feedback Stabilization of an Electropneumatic System
State of the Art in Hydraulic Switching Control - Components, Systems, Applications
Static and Dynamic Characteristics of Pressure Valves (in Czech)
Static Experimental Research on a Water Hydraulic Trial System
Static Model for the Flexible Pneumatic Finger with Three Joints
Static Output Feedback Control for Electrohydraulic Active Suspensions via T–S Fuzzy Model Approach
STATIC-PERFORMANCE BASED COMPUTER-AIDED DESIGN OF A DDV AND ITS SENSITIVITY ANALYSIS
STATIONARY AXIAL FLOW FORCE ANALYSIS ON COMPENSATED SPOOL VALVES
Steady state analysis of the Load Sensing system
STEADY STATE AND DYNAMIC CHARACTERISTICS OF WATER HYDRAULIC PROPORTIONAL CERAMIC SPOOL VALVE
Steady State Force Characteristics and Sensitivity Analysis of a Proportional Solenoid Pilot Operated Two Stage Pressure Relief Valve
Steering System of John Deere 8000 Series Track Tractors
Structural Health Monitoring of a Vehicle Crane
Structure-enhanced yield stress of magnetorheological fluids
Studies of Stick-Slip Friction, Presliding Displacement, and Hunting
Studying the Flow Field Inside Lateral Clearances of External Gear Pumps
Study of Cost and Energy Consumption for Pneumatic Actuator and Electric Actuator
Study of Effect of Power-Law Fluid Laminar in the Inlet Region of Two-dimensional Channel
Study of Ion-exchange Polymer Metal Composite (IPMC) Actuator
Study of "Sticking and Restarting Phenomenon" in Electropneumatic Positioning Systems
Study of the inertial effect and the nonlinearities of the CRONE suspension based on the hydropneumatic technology
Study of Web-Based Tele-Operation of Pneumatic Manipulator
Study on a Liquid Flow Rate Measurement System Using an AE Sensor
Study on a Theoretical Design Method for External Gear Pumps
Study on Auto Tracking Electro-hydraulic Servo System for Rail Crack Detection Vehicle
Study on Compound Control of High Speed Hydraulic Torque-load Simulator
Study on Displacement Control Strategy of a Two Ranges Hydro-Mechanical Transmission and Numerical Simulation
Study on Energy Regulation Based Variable-Speed Electrohydraulic Motor Control System
Study on Force-Feedback Method of Tele-Operated Hydraulic Construction Robot
Study on Hybrid Optimization Method of Accelerated Life Test to Hydraulic Pump
Study on Impact System of Hydraulic Ramming-drawing Device Controlled by Pressure Feedback
Study on Individual Pressure Control in Energy Efficient Cylinder Drives
Study on Measuring and Increasing Effective Fluid Bulk Modulus
Study on Measuring Flow Rate Characteristic of Pneumatic Solenoid Valve by Isothermal Chamber Discharge
Study on Microprocessor-based Car Speed Feedback Control of Hydraulic Elevators
STUDY ON MOVEABLE ROLLER CONTROL OF THE ROLLER PRESS
Study on New-type Hydraulic Slewing System
Study on Pipeline Vibration of the Aircraft Hydraulic System
Study on the Dynamics of a Load Sensing System
Study on the High-Sealing of Roots Rotor With Variable Trochoid Ratio
Study on the Humanoid Robot Wrist Actuated by Pneumatic Muscle Actuators
Study on the Model Identification and the Experiment of the HAGC System in the 1800 Rolling Mill
Study on the Multi-mode Fuzzy Control with Corrected Factors
Study on the opening characteristics of super-high voltage circuit breakers with hydraulic operating mechanism
Study on Water Hydraulic 2/2 Directional Valve with Plane Piston Structure
SUCTION CAPABILITY OF GEAR PUMPS
Suppression of Micro Stick-Slip Vibrations in Hydraulic Servo-System
Suppression of residual vibration of a translating-swinging load by a flexible manipulator
Surrogate Model Assisted Evolutionary Optimization of Hydraulic Valve Controllers
Switching Control of a Linear Hydraulic Drive - Experimental Analysis
Switching Magnetic Valve Electronics
Switching Type Control of Hydraulic Drives - A Promising Perspective for Advanced Actuation in Agricultural Machinery
Synchronization of hydraulic cylinder displacements
Synchronization of Rotating Machines with Alternating Flow Hydraulics
Synchronous motion control of thrust system of pipe jacking shield machine
Synchronous motion of two-cylinder electrohydraulic system with unbalanced loading and uncertainties
Synthesis and Comparison of Control Algorithms for Hydraulic Drive With One and Two Control Valves (in Czech)
System Analysis and Optimization for Traceability in Design
Systematic Experimental Studies and Computational Perspectives of the Non-Linear Squeeze Mode Behaviour of Magneto-Rheological Fluids
System Dependent Stability of Direct Acting Relief Valves
System Dynamics and Control of a Linear Compressor for Stroke and Frequency Adjustment
System Identification of Hydraulic Systems by the Self-Excited Oscillation Method
System level modelling of mechanical losses in actuators
System Topology Optimization
Tailor-Made Cylinders Need Tailor-Made Sealing Systems -Corrosion Protection and Drag Pressure Prevention for 18 Meter Cylinder Stroke
Takagi-Sugeno fuzzy modelling and parallel distributed compensation control of conducting polymer actuators
Tap Water Hydraulic Machines and Tools
TECHNIQUES FOR STUDYING A MOBILE HYDRAULIC CRANE IN VIRTUAL REALITY
Temperature Calculation in Hydraulic Systems
Tensor Analysis Based Symbolic Computation for Mechatronic Systems
TESTING AND DEVELOPMENT OF HYDRAULIC FILTER PERFORMANCE UNDER VARIABLE FLOW CONDITIONS – NEW FILTER SOLUTION
Testing and Modeling of MR Damper and Its Application to SDOF Systems Using Integral Backstepping Technique
Test methods for flow sharing directional valves
Test Stand Development for Investigating Digital Pump/Motor Operating Strategies
The Adhesion Gripper as novel Gripping Device
The Analytical Solution of Excited Waveforms of an Electro-hydraulic Vibration Exciter Using a Two-dimensional Valve
The Application of Capacitive Transducer in Hydraulic Synchronizing Continuous Lifting Velocity Control System
The Capability of Hydraulic Constant Pressure Systems with a Focus on Mobile Machines
The Center for Compact and Efficient Fluid Power
The Characteristics of Ceramic Spool Valve Piloted Water Hydraulic Proportional Valve
THE CHARACTERISTICS OF THE ONE-PISTON RADIAL PUMP WITH FLOW COMPENSATION PISTON MECHANICS
THE CONCEPT AND DESIGN OF PLEATED PNEUMATIC ARTIFICIAL MUSCLES
The Condition Monitoring of Hydraulic Hoses
The Control and Containment Forces on the Swash Plate of an Axial-Piston Pump
The Controller of Pneumatic Cylinder of Embedded System Based on ARM
The Control Torque on the Swash Plate of an Axial-Piston Pump Utilizing Piston-Bore Springs
The CPR System Adopting a New Hydraulic Transformer to Drive Loads and Its Design
The Design and Development of ITER Divertor RH Equipment @ DTP2 Facility
The Design and Optimization of Switched and Proportional Valves Using the Precise Models (in Czech)
The design and study of Fuzzy Parameters Self-tuning PID temperature Controller for Large-Scale Hydraulic power unit
The Design of a Robust Controller for Hydrostatic Transmissions
The Design of Mechanisms With High-Pressure Membrane Element (in Czech)
The Design, Simulation and Control of a Wave Energy Converter Power Take Off
The Development of Centrifugal Turbo Compressor Stage Using CFD
The Digital Simulation and Practice of Hydraulic Steering System for Trolley 900 Ton
The Discharge Flow Ripple of an Axial-Piston Swash-Plate Type Hydrostatic Pump
THE DYNAMIC CHARACTERISTICS OF TAPERED FLUID LINES WITH VISCOELASTIC PIPE WALLS (TRANSFER MATRIX AND FREQUENCY RESPONSE)
The Dynamic Properties of a Poppet Type Hydraulic Flow Amplifier
The Dynamics Modeling of Pneumatic Mechanism with Double-Acting Cylinder (in Czech)
The Effect of Coding Method on Pressure Peaks in Digital Hydraulic System
The Effect of Pump Efficiency on Displacement−Controlled Actuator Systems
THE EFFECT OF SYSTEM PRESSURE LEVEL ON THE ENERGY CONSUMPTION OF DISPLACEMENT CONTROLLED ACTUATOR SYSTEMS
THE ENERGY EFFICIENCY OF HYDRAULIC LINEAR MOTORS UNDER PROPORTIONAL CONTROL
The Experimental Study on Centrifugal Pump with Jetting Device
The full vehicle simulation – a virtual test environment for mobile hydraulic systems
The Generalized Loading Principle Based on Parallel 6-DOF Electro-hydraulic Servo Mechanism
The Generalized Pulse Code Modulation Pneumatic Servo System and its Control
The Hydraulic Drives For Moulding Machines (in Czech)
The Hydraulic Hybrid Alternative for Toyota Prius – A Power Management Strategy for Improved Fuel Economy
The Impact of Using a Secondary Swash-Plate Angle Within an Axial Piston Pump
The Improved Volumetric-Efficiency of an Axial-Piston Pump Utilizing a Trapped-Volume Design
The Influence of Fluid Compressibility on Discharge Flow in High Pressure Vane Within Vane Type Pump
The Influence of Pumps and Valves on the Efficiency of a Hydraulic Boom
THE INFLUENCE OF THE MICROSCOPIC AND MACROSCOPIC GAP GEOMETRY ON THE ENERGY DISSIPATION IN THE LUBRICATING GAPS OF DISPLACEMENT MACHINES
The Integrated Digital Control System For Parker Hydrogenerators (in Czech)
The Introduction of Artificial Faults into a Proportional Solenoid Valve
The Kinematics Analysis and Structure Improvement on Connecting Rods of the Crankshaft Connecting-rod Type Low Speed High Torque Hydraulic Motor
The Linear Electrohydraulic Actuators For Theatre Technics (in Czech)
The lubrication network in internal combustion engines: a simulation approach
The Matlab Simlulation Analysis of the Hydro-Viscous Drive Based on the PID Control Technique
The Modelling of Wheel-Loader Hydromechanical Elevator (in Czech)
The Multifunctional Hydraulic Machine with the Electronic Control System
The Neural Network Identification of the Electro - hydraulic Servo System
The Neural Network Position-Control of a Moving Platform Using Electrorheological Valves
The New Way of Noise Reduction in External Gear Pumps
The Numerical Simulation and Experimental Investigation on the Heat-transferring Behavior of Sinusoidal Corrugated Tube
The Optimization of Spool Proportional Valve for the Special Hydraulic Adapter With Two-Directional Mobility by Use of Physical and CFD Modelling (in Czech)
Theoretical Analysis of the Spring Characteristic in a Pneumatic Suspension
Theoretical and experimental analysis of a 2-way flow control valve dynamic behaviour
THEORETICAL AND EXPERIMENTAL ANALYSIS OF THE MULTIFUNCTIONAL HYDROSTATIC MACHINE
Theoretical and experimental investigation of hydraulic manipulator position control
Theoretical and Experimental Investigations of an Opto-Pneumatic Detector
Theoretical and Experimental Researches on the Electrohydraulic Speed Governors for Hydraulic Turbines
Theoretical and Experimental Researches on the Hydraulic Shock Absorbers
Theoretical and experimental research of the Proportional Solenoids for Electrohydraulic Control Systems
Theoretical and Experimental Research on Sliding Mode Control for an Electrohydraulic Servosystem
THEORETICAL AND EXPERIMENTAL STUDIES OF A NEW HYDROSTATIC COUPLING
Theoretical and Experimental Studies on Fluid Energy Recovery System
Theoretical and Experimental Study of the Matching Between Proportional Valves and Symmetric and Asymmetric Cylinders
Theoretical Research on the Control Scheme of Master-Slave Telerobot with Force Feedback Telepresence
Theoretical simulation of ripples for different leading-side groove volumes on manifolds in fixed-displacement axial-piston pump
Theoretic Study on Flow Characteristics of Sliding-tooth Pump
The Position Control of ElectroHydraulic Servo Systems Based on B-spline Neural Networks
The Power of Manufacturing to Raise Efficiency of Fluid Systems
The Precise and Economical Electrohydraulic Systems in Secondary Metallurgy (in Czech)
THE PROBLEMS OF TIMBER CUTTING IN FOREST MACHINES
The Properties of Hydraulic Fluids Utilized in Fluid Drives at Low OperatingTemperatures
The PWM Oil Temperature Control in Hydraulic system Based on MNN Neural Network
The recent developments in aerospace hydraulics, focussing on the new Airbus A380
The Relative Motion Between the Ball Guide and Slipper Retainer Within an Axial-Piston Swash-Plate Type Hydrostatic Pump
The Research of a Full Hydraulic Pressure Hydraulic Impactor with Strike Energy and Frequency Adjusted Independently
The Research of Internet-based Hydraulic Servo
The Research of Mechanical Failures Diagnosis Based on Virtual Test Theory
The Research of the Pump and Motor of the Same Width and with Single−Rollor and Double−Stators
The Research on Position Control of A New Robot Arm Joint Mechanism Driven by Pneumatic Artificial Rubber Muscles
The Resonance Converter - A Novel Method for Hydraulic Fluid Power Control
Thermal Analysis in Axial Piston Machines Using CASPAR (Simulation Tool for Performance Prediction and Design Optimization)
Thermal Simulation as a Part Of a Life−Time Simulation of Hydraulic Oils
THERMAL SIMULATION OF AN AIRCRAFT FLUID POWER SYSTEM WITH HYDRAULIC-ELECTRICAL POWER CONVERSION UNITS
Thermic Influence on the Dynamics of Pneumatic Servosystems
The Role of Hydraulic Actuation in the Mechatronization of Agricultural Machinery
The Role of Resonance in Elementary Hydraulic Switching Control
The Segregation Problem of Magnetorheological Fluids in Squeeze Mode – An Experimental Investigation
The Shaft Torque of a Tandem Axial-Piston Pump
The Simulation of Cleanliness Level in Hydraulics
The Smalve - An Integrated Digital Control Solution for Hydraulic Drives
The Smalve - Integrated Digital Control of a Hydraulic Servo Drive
THE SOURCE ADMITTANCE METHOD A NEW MEASUREMENT METHOD FOR HYDROSTATIC PUMP FLOW PULSATIONS
The source admittance method for pumps with complex outlet channels
The Source Admittance Method for Pumps with Complex Outlet Channels
The Test Rig for Lubrication Properties of Port Pairs in Axial Piston Pump and Preliminary Test Investigation on It
The Theoretical Flow Ripple of an External Gear Pump
The Use of Virtual Prototyping And Simulation in ITER CMM/SCEE−Mover Control System Development
THREE-DIMENSIONAL ANALYSIS OF FLOW FORCES ON DIRECTIONAL CONTROL VALVES
Throttling and Volumetric Control Principle to an Electrohydraulic Velocity Servomechanism
Time-optimal motion planning and control of an electrohydraulically actuated toggle mechanism
Tip-Over Stability of Manipulator-Like Mobile Hydraulic Machines
Tipping the Cylinder Block of an Axial-Piston Swash-Plate Type Hydrostatic Machine
TOOL CENTRE CONTROL OF MOBILE HYDRAULIC MANIPULATORS
Tool Point Control of Mobile Hydraulic Manipulators
TOPOLOGY OPTIMIZATION OF THE CONNECTING ROD
TORQUE ANALYSIS OF ROTARY SEALS IN HEES
TORQUE CONTROL SYSTEM BASED ON COMPOUND CONTROL STRATEGIES FOR AERODYNAMIC LOAD SIMULATOR
Toward Safe and Human Friendly Hydraulics: The Passive Valve
TOWARDS AN OPTIMAL ENERGY MANAGEMENT STRATEGY FOR HYBRID HYDRAULIC POWERTRAINS BASED ON DUAL STAGE POWER SPLIT PRINCIPLE
TOWARDS AN OPTIMAL ENERGY MANAGEMENT STRATEGY FOR HYDRAULIC HYBRID POWERTRAINS BASED ON OUTPUT - COUPLED POWER SPLIT PRINCIPLE
Towards Autonomous Control of Hydraulic Actuator Systems
Towards Coupling Computational Fluid Dynamics with System Dynamic Simulation Softwares
Towards intelligent mobile machines - GIM research
Towards More Electric Drives for Embedded Applications: (Re)discovering the Advantages of Hydraulics
Towards Shared Control of Hydraulic Excavators
Tracking Control of Hydraulic Actuators Using a LuGre Friction Model Compensation
Tracking of High Acceleration Movements With a Pneumatic Impedance Controller
Trajectory-tracking Control in a Proportional Hydraulic Robotic Excavator
Transient Flow Force Estimation on the Pilot Stage of a Hydraulic Valve
Transient Pressure Control in Digital Hydraulic Systems
Transient Response Dynamics of Dynamic Vibration Absorbers for the Attenuation of Fluid-Flow Pulsations in Hydraulic Systems
Transient simulation of pneumatic valve solenoids with the method of finite elements
Trend Prediction of Degradation of Hydraulic System Parts (in Czech)
Trends in Miniature Hydraulic Directional Control Valves. Design and Applications
TRENDS IN MODELLING, SIMULATION AND DESIGN OF WATER HYDRAULIC SYSTEMS - MOTION CONTROL AND OPEN-ENDED SOLUTIONS
Trends in Pneumatics
Tribological and Ecotoxicological Behaviour of a Synthetic Ester and its Effect on Friction and Wear in Axial Piston Pumps
Tribological Impact of Surface Modifications to Frictional Counterparts in Contact with TPU Compounds
Tribological Properties of Tailor-made Fuels from Biomass
Tribological simulation of a hydrostatic swash plate bearing in an axial piston pump
Two Basic Concepts of Hydraulic Switching Converters
Two-degree-of-freedomC ontrol Design for Ball Screw Driving Table Using Full-closed Loop
Two-dimensional Braille readers based on electrorheological fluid valves controlled by electric field
Two equivalent control structures for an electrohydraulic actuator
Ultra High Speed Hydraulic Turbo Motor
Underwater Hydraulic Power Pack Using Seawater as Medium
Universal Clutch Actuation System
Unsolved Problems in the Design and Development of Tree Shakers for Fruit Harvesting
Unstable Cavitation Behaviors in Spool Valves with U-notches
Use of Additive Manufacturing to Create Functional Fluid Power Components
Use of CFD Simulation for Optimizing the Functionality of Mass Flow Controllers
Use of pipeline wave propagation model for measuring unsteady flowrate
USE OF SIMULATION WITHIN SAUER-DANFOSS A STRATEGIC APPROACH
User Interface with Multisensory Feedback for Fluid Powered Rescue Robot
Using CFD to Establish a Correlation between Design Parameters and Performance Characteristics for Seat Valves
Using Steady Flow Force for Unstable Valve Design: Modeling and Experiments
Utilization of Actuators to Improve Vehicle Stability at the Limit: From Hydraulic Brakes Toward Electric Propulsion
Utilization of braking energy at some hydraulic machines
Utilization of RFID and pressure sensor for intelligent hose condition monitoring
Validation of a Coupled Pump-Motor-Line Model to Predict Noise Sources of Hydrostatic Transmissions
VALVE PLATE SURFACE TEMPERATURE PREDICTION IN AXIAL PISTON MACHINES
VALVING LAND PHENOMENA OF THE INNAS HYDRAULIC TRANSFORMER
Variable Displacement Gerotor Pump Design
Variable Load Sensing Electro-Proportional Valve with Torque, Power and Anti-Stall Control for Variable Displacement Axial Piston Pumps
Variable Speed Drives - Customer Benefits in Injection Molding Machines and Presses
Vehicle Active Suspension System Control Using Neural Network
Vehicle Dynamics Investigation Using a Hydraulic Hardware-in-the-Loop Test-Rig
Velocity Controlled Pneumatic Cam Motor
Ventilation system airflow dynamics
Vibration Control of a Flexible Structure Using ER Dampers
Vibration Damping of the Crane
Vibroacoustic load reduction in hydro mechanical systems by use of flow oscillation dampers
Virtual-design-model-based pressure-tracking control of high-dynamic pneumatic valves using a sliding mode controller combined with a proportional-integral-derivative scheme
Virtual design of high dynamic pneumatic valves
Virtual Prototype of a Remote Controlled Hydraulic Mobile Machine for Teleoperation Control Development
Virtual Prototyping of Hydraulic Moulding Machines (in Czech)
Virtueller Entwurf servopneumatischer Ventile
Viscosity measurement device for tailor made fuels under high pressure conditions
VISCOUS DAMPING COEFFICIENT AND EFFECTIVE BULK MODULUS ESTIMATION IN A HIGH PERFORMANCE HYDROSTATIC ACTUATION SYSTEM USING EXTENDED KALMAN FILTER
Visualization Analysis in an Oil Hydraulic Ball Valve and Improvement
Visual Research on the Flow Field in Hydraulic Cartridge Poppet Valve with 3-D Model
Voronoi Diagrams and Stress-directed Lattice Structures Applied to Weight Reduction
Vortex Dynamics in Starting Square Water Jets
VVVF CONTROLLED INDUCTION MOTOR FOR ELECTRICITY REGENERATION AND GENERATION IN A CYLINDER DRVIEN OIL HYDRAULIC
Water Hydraulic Teleoperation System for ITER
WATER HYDRAULIC WELD/CUT ROBOT WITH PARALLEL ARCHITECTURE
Water Mist Fire Fighting – High−Pressure Water Mist Nozzles
WEIGHT FUNCTION SELECTION IN H ∞ MIXED SENSITIVITY DESIGN
What are the Prospects Facing New Ideas in Fluid Power?
What Will be the Future of Fluid Power
Wireless Pressure Monitoring WPM
Zero-Leak O-Rings by Using Adaptive Materials
Zur Stabilität servohydraulischer Systeme
Zur Wellenausbreitung in gekrümmten Rohren